DE9116 - Uncategorized DEWALT - Free user manual and instructions
Find the device manual for free DE9116 DEWALT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless drill driver |
| Brand | DeWalt |
| Model | DE9116 |
| Dimensions (L x W x H) | 200 x 60 x 200 mm |
| Weight | 1.5 kg (without battery) |
| Power supply | 18V Lithium-Ion battery |
| Drilling capacity (steel) | 13 mm |
| Drilling capacity (wood) | 38 mm |
| No-load speed | 0-550 / 0-2000 rpm |
| Maximum torque | 60 Nm |
| Chuck | Keyless, self-tightening 1.5-13 mm |
| Main functions | Drilling, screwdriving, hammer |
| Care and cleaning | Clean with a dry cloth, avoid moisture |
| Safety | Use safety glasses and gloves |
| Spare parts and repairability | Available at authorized DeWalt dealers |
| Warranty | 1 year according to conditions |
| Sound level | 85 dB(A) |
| Vibration | 2.5 m/s² |
Frequently Asked Questions - DE9116 DEWALT
How to change the chuck of the DE9116?
To change the chuck, use an Allen key to loosen the center screw. Remove the chuck by turning counterclockwise. Install the new chuck and tighten the screw.
Which battery is compatible with the DE9116?
The DE9116 is compatible with all DeWalt 18V batteries of the XR and DCB series. Preferably use an original DeWalt battery for best performance.
How to clean the DE9116?
Use a dry, lint-free cloth to clean the exterior. Do not use harsh chemicals. For ventilation slots, a soft brush can be used.
The DE9116 makes an abnormal noise, what to do?
Stop the tool immediately. Check that the battery is correctly inserted and that the chuck is not loose. If the noise persists, contact an authorized DeWalt service center.
How to adjust the torque?
Turn the torque adjustment ring located behind the chuck. Numbers indicate torque level, from lowest (1) to highest (20). Use drill mode for maximum torque.
Can I use the DE9116 to drill concrete?
Yes, the DE9116 is equipped with a hammer function suitable for drilling in concrete. Use a hammer drill bit and set the selector to hammer mode.
How to know if the battery is charged?
DeWalt batteries have an LED indicator. Press the test button to display the charge level: green for charged, red for low.
The chuck no longer grips, what to do?
Clean the chuck jaws and check they are not worn. If the problem persists, the chuck must be replaced. Consult the manual for the procedure.
What is the maximum speed of the DE9116?
The maximum speed in high position is 2000 rpm. Use the trigger for variable speed control.
Where to find the serial number?
The serial number is on the label on the side of the motor housing. It starts with letters 'DE9116' followed by a number.
User questions about DE9116 DEWALT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DE9116 - DEWALT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DE9116 by DEWALT.
USER MANUAL DE9116 DEWALT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DEWALT
Model : DE9116
Category : Uncategorized