AMBMT491BI - Tumble drier BEKO - Free user manual and instructions
Find the device manual for free AMBMT491BI BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Condenser Tumble Dryer |
| Model | AMBMT491BI |
| Brand | Beko |
| Capacity | 9 kg |
| Energy Class | A++ |
| Drying Programs | Cotton, Synthetics, Mix, Delicates, Wool, Sport, Timed, Quick Dry |
| Dimensions (H x W x D) | 84.6 cm x 59.5 cm x 60.0 cm |
| Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 2.5 kWh per cycle (cotton full load) |
| Noise Level | 65 dB(A) |
| Drum Material | Stainless Steel |
| Filter Type | Lint filter with auto-clean |
| Condenser Cleaning | Self-cleaning condenser |
| Reverse Drum Action | Yes |
| Child Lock | Yes |
| Delay Start | Up to 24 hours |
| End of Cycle Signal | Buzzer |
| Repairability Index | 7.8 / 10 |
Frequently Asked Questions - AMBMT491BI BEKO
How do I install the tumble drier?
Place the dryer on a firm, level floor. Leave at least 5 cm of space around it for ventilation. Remove all packaging and the transport bolts at the back. Connect the drain hose to a sink or drain pipe if using a condenser model, or ensure the water container is properly inserted. Plug into a grounded outlet.
Why is my dryer not heating?
Check if the program is set to a low-heat or air-dry setting. Ensure the lint filter and condenser are clean. Verify that the power cord is plugged in and the circuit breaker has not tripped. If the problem persists, the heating element might be faulty.
How often should I clean the lint filter?
Clean the lint filter after every drying cycle. Remove it, peel off the lint layer, and rinse under water if necessary. Let it dry completely before reinserting.
What does the self-cleaning condenser mean?
The self-cleaning condenser uses a water spray system to automatically clean the condenser unit during the drying cycle, reducing the need for manual cleaning. However, occasional manual cleaning is recommended every few months.
Can I dry all types of fabrics?
Most fabrics are suitable, but check care labels. Avoid drying items with plastic, rubber, or foam. Use the correct program for delicates, wool, and synthetics to prevent damage.
How do I reset the dryer?
Turn the program selector to the off position, unplug the dryer for 10 seconds, then plug it back in. Select and start a new program.
What is the maximum load for cotton?
The maximum load for a cotton program is 9 kg. Overloading can affect drying performance and cause uneven results.
Why does the dryer stop mid-cycle?
Possible causes: the water tank is full (if condenser type with tank), the lint filter is clogged, the door is opened, or the program has a cool-down phase. Check the water container (if applicable), clean the filter, and ensure the door is closed properly.
How do I clean the condenser?
For manual cleaning, remove the lower front panel (refer to manual), take out the condenser unit, rinse it with water from the opposite direction of airflow, and dry it thoroughly before reinstalling. Do not use sharp objects.
Is the dryer energy efficient?
Yes, this model is class A++, which means it consumes less energy than standard dryers. Using eco programs and drying full loads can further reduce energy consumption.
User questions about AMBMT491BI BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual AMBMT491BI - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AMBMT491BI by BEKO.
USER MANUAL AMBMT491BI BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : AMBMT491BI
Category : Tumble drier