BMT103EW - Tumble drier BEKO - Free user manual and instructions
Find the device manual for free BMT103EW BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Beko |
| Model | BMT103EW |
| Capacity | 7 kg |
| Dimensions (Height x Width x Depth) | 84.5 cm x 59.5 cm x 59 cm |
| Weight | 33 kg |
| Power Supply | 220-240 V, 50 Hz |
| Energy Efficiency Class | B |
| Annual Energy Consumption | 560 kWh |
| Drying Programs | Cotton, Synthetics, Delicates, Mix, Time Dry, Iron Dry, Cupboard Dry, Extra Dry |
| Drying Technology | Condenser with Heat Pump |
| Noise Level | 65 dB(A) |
| Delay Start | Up to 24 hours |
| Lint Filter | Removable, clean after each use |
| Water Tank | 2.5 L (manual drain) |
| Anti-Crease Function | Yes |
| Child Lock | Yes |
| Maintenance | Clean condenser unit every 30 cycles; empty water tank after each cycle |
| Spare Parts Availability | Filters, belts, motors, electronic boards available for 10 years after production |
| Repairability Index | 7.5/10 (based on EU regulations) |
Frequently Asked Questions - BMT103EW BEKO
How do I clean the lint filter on my Beko BMT103EW dryer?
Open the door, locate the lint filter at the bottom of the door opening, pull it out, and remove lint by hand. Rinse under running water if needed, dry thoroughly, and reinsert. Clean after every cycle to maintain performance.
What is the maximum load capacity of the Beko BMT103EW?
The maximum load capacity is 7 kg for cotton and 3.5 kg for synthetics. Overloading can reduce drying efficiency and damage the machine.
How do I drain the water tank?
Pull out the water tank located at the top right of the dryer, unscrew the cap, and pour water into a sink. Replace and push back in. The tank holds 2.5 L; empty after each cycle to avoid overflow.
What do the error codes mean on my Beko dryer?
Common codes: E01 - no water in tank; E02 - lint filter blocked; E03 - door open. Refer to the manual for a full list or contact Beko support.
Can I install the dryer in a small room?
Yes, but ensure proper ventilation. The dryer produces moisture, so the room should have an open window or adequate airflow. Minimum clearance: 5 cm from walls.
How do I use the delay start function?
Press the 'Delay' button repeatedly to set the desired delay in hours (up to 24). Select a program and press start. The dryer will begin after the set time.
Is the Beko BMT103EW energy efficient?
Yes, it is energy class B with an annual consumption of 560 kWh. Using the heat pump technology, it saves up to 50% energy compared to conventional condensers.
How often should I clean the condenser unit?
Clean the condenser every 30 cycles or when the 'Clean Condenser' light appears. Remove the front panel, rinse the condenser fins with water, and dry before reinserting.
My dryer is not drying properly. What could be wrong?
Check the lint filter and water tank; ensure they are clean and empty. Also verify that the load is not too large. If problem persists, clean the condenser or contact service.
Can I stack the dryer on top of a washing machine?
Only with a Beko stacking kit (sold separately). The dryer weighs 33 kg, so the washing machine must be at least 60 cm wide and able to support the weight.
User questions about BMT103EW BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual BMT103EW - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BMT103EW by BEKO.
USER MANUAL BMT103EW BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : BMT103EW
Category : Tumble drier