Haus & Luft

HL-WP-02 - Fan Haus & Luft - Free user manual and instructions

Find the device manual for free HL-WP-02 Haus & Luft in PDF.

📄 32 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Haus & Luft HL-WP-02 - page 9
View the manual : Deutsch DE English EN Polski PL Українська UK
Pick your language and provide your email: we'll send you a specifically translated version.
Type of product Tower Fan
Model HL-WP-02
Brand Haus & Luft
Height 90 cm
Width 30 cm
Depth 30 cm
Weight 3.5 kg
Power supply 220-240 V ~ 50/60 Hz
Power consumption 45 W
Speed settings 3 speeds (low, medium, high)
Oscillation Yes, 80°
Timer Up to 7 hours
Remote control Yes, included
Type of blades Aerodynamic, whisper-quiet
Noise level < 50 dB
Care and cleaning Wipe with a damp cloth; do not immerse in water
Safety features Overheat protection, tip-over switch
Spare parts available Remote control, power cord, blade assembly
Repairability Modular design, replacement parts available
General information Ideal for home or office use; quiet operation, easy assembly

Frequently Asked Questions - HL-WP-02 Haus & Luft

How do I clean the fan?
Unplug the fan and wipe the exterior with a damp cloth. Do not use abrasive cleaners or immerse the fan in water. For the blades, use a soft brush or vacuum attachment.
Can I use the fan in a bathroom?
No, this fan is not designed for high humidity areas. Use it in dry rooms only to avoid electrical hazards.
How do I set the timer?
Press the Timer button on the control panel or remote. Each press increases the timer by 1 hour, up to 7 hours. The fan will automatically turn off after the set time.
Why is the fan making noise?
Ensure the fan is on a flat, stable surface. Loose parts or debris in the blades can cause noise. Check for any obstructions and tighten screws if needed.
How do I replace the remote control battery?
Slide the battery cover open and replace the CR2025 battery with the correct polarity (+/-). Close the cover securely.
Does the fan oscillate?
Yes, press the Oscillation button to activate side-to-side movement. Press again to stop at a desired position.
What should I do if the fan stops suddenly?
Check if the overheat protection has triggered. Unplug the fan, let it cool for 30 minutes, and then plug it back in. If it doesn't work, contact customer support.
Can I use the fan with an extension cord?
It is recommended to plug the fan directly into a wall outlet. If an extension cord is necessary, use a heavy-duty cord rated for 10A or more.
How do I change the speed?
Press the Speed button to cycle through Low, Medium, and High. The corresponding indicator light will show the current setting.
Where can I find spare parts?
Spare parts such as remote control, power cord, and blade assembly are available from Haus & Luft authorized dealers or online. Use only genuine parts.

User questions about HL-WP-02 Haus & Luft

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Fan in PDF format for free! Find your manual HL-WP-02 - Haus & Luft and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HL-WP-02 by Haus & Luft.

USER MANUAL HL-WP-02 Haus & Luft

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Haus & Luft

Model : HL-WP-02

Category : Fan