HL-KP-20 - Air Conditioning Haus & Luft - Free user manual and instructions
Find the device manual for free HL-KP-20 Haus & Luft in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Portable Air Conditioner |
| Model | HL-KP-20 |
| Brand | Haus & Luft |
| Cooling Capacity | 9000 BTU/h (2.6 kW) |
| Heating Function | None (cooling only) |
| Airflow Rate | 300 m³/h |
| Dehumidification Capacity | 1.2 L/h |
| Noise Level | 55 dB(A) |
| Power Supply | 230 V ~ 50 Hz |
| Power Consumption | 900 W |
| Dimensions (W x D x H) | 700 x 350 x 450 mm |
| Weight | 22 kg |
| Refrigerant | R290 |
| Operating Temperature | 16 °C – 30 °C |
| Timer | 24-hour programmable |
| Remote Control | Included |
| Filter | Washable mesh |
| Drainage | Continuous or manual |
| Caster Wheels | Yes |
| Energy Class | A |
Frequently Asked Questions - HL-KP-20 Haus & Luft
How do I install the HL-KP-20 air conditioner?
Place the unit near a window and attach the exhaust hose to the included window kit. Ensure the hose is straight and unobstructed for proper airflow. Plug into a grounded 230V outlet.
How often should I clean the filter?
Clean the washable filter every two weeks under normal use. Remove the filter, rinse with lukewarm water, let it dry completely, and reinsert. A dirty filter reduces efficiency.
What do I do if the unit displays an error code?
Refer to the manual for specific codes. Common codes include E1 (room temperature sensor fault) or E2 (coil sensor fault). Turn off the unit, wait 5 minutes, and restart. If persists, contact support.
Can I use the air conditioner without the exhaust hose?
No, the exhaust hose must always be connected to expel hot air. Using it without the hose will cause poor cooling and potential damage.
How do I drain the water from the unit?
In cool mode, water is evaporated automatically. In dehumidify mode, the tank may fill. Drain by removing the bottom plug or attaching a continuous drain hose. Check the manual for your model.
What is the recommended temperature setting?
For optimal comfort and energy efficiency, set the temperature between 22°C and 24°C (72°F – 75°F). Avoid extreme settings.
Why is the air conditioner not cooling properly?
Check if the filter is dirty, the exhaust hose is blocked or bent, doors/windows are open, or the room is too large for the unit's capacity. Also ensure the set temperature is lower than room temp.
How do I use the remote control?
Insert two AAA batteries (not included). Point the remote at the unit's receiver. Use buttons for mode (Cool/Dry/Fan), fan speed, temperature, and timer. Range is about 8 meters.
Is the refrigerant R290 flammable?
R290 (propane) is a flammable refrigerant. The unit is designed with safety features, but avoid using near open flames or exposing to high heat. Follow the manual's safety instructions.
What spare parts are available for the HL-KP-20?
Common spare parts include the washable filter, remote control, exhaust hose, window kit, and continuous drain hose. Contact Haus & Luft customer service or authorized dealers.
User questions about HL-KP-20 Haus & Luft
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual HL-KP-20 - Haus & Luft and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HL-KP-20 by Haus & Luft.
USER MANUAL HL-KP-20 Haus & Luft
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Haus & Luft
Model : HL-KP-20
Category : Air Conditioning