Laser Line LL 400V - Uncategorized Weller - Free user manual and instructions
Find the device manual for free Laser Line LL 400V Weller in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Weller |
| Model | Laser Line LL 400V |
| Product Type | Soldering Station |
| Power Supply | 400 V / 50-60 Hz |
| Power | 150 W |
| Temperature Range | 150 °C to 450 °C |
| Temperature Control | Electronic with LED Display |
| Dimensions (L × W × H) | 200 × 150 × 100 mm |
| Weight | 2.5 kg |
| Main Functions | Soldering, desoldering, temperature regulation, auto standby |
| Maintenance and Cleaning | Clean the tip with a damp sponge or specific cleaner |
| Safety | Automatic shut-off when not in use, overheat protection |
| Spare Parts and Repairability | Replacement tips, desoldering tank, filters |
| Included Accessories | Soldering iron holder, sponge, power cable |
| Warranty | 2 years |
Frequently Asked Questions - Laser Line LL 400V Weller
What is the temperature range of the Weller LL 400V station?
The temperature range is 150 °C to 450 °C, adjustable by knob or buttons.
How do I change the tip of the station?
Unplug the device, unscrew the iron nut, remove the old tip and insert the new one. Screw the nut back on and turn on the device.
What to do if the temperature does not rise?
Check that the tip is fully inserted and the cable is plugged in. If the problem persists, refer to the manual for heater replacement.
How to clean the soldering tip?
Use a damp sponge or a specific tip cleaner. Do not rub too hard to avoid damaging the tip.
What types of tips are compatible with this model?
This model accepts Weller tips from the LT series. Consult the catalog to choose the appropriate shape.
How to activate the auto standby function?
The auto standby activates after a period of inactivity set by default. You can configure it via the device menu.
The station displays error E01. What to do?
Error E01 indicates a heater defect. Check the iron connection and replace the heater if necessary.
How to calibrate the temperature?
Use an external thermometer and adjust the offset via the calibration menu of the station.
What is the power of the LL 400V station?
The power is 150 W, sufficient for most electronic soldering work.
Where to find the electrical diagram?
The electrical diagram is available in the device manual, on page 32 of the PDF manual.
User questions about Laser Line LL 400V Weller
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Laser Line LL 400V - Weller and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Laser Line LL 400V by Weller.
USER MANUAL Laser Line LL 400V Weller
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Weller
Model : Laser Line LL 400V
Category : Uncategorized