Laser Line LL 200V - Uncategorized Weller - Free user manual and instructions
Find the device manual for free Laser Line LL 200V Weller in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Laser line level |
| Brand | Weller |
| Model | Laser Line LL 200V |
| Dimensions (L x W x H) | 120 x 60 x 80 mm |
| Weight | 0.3 kg |
| Power supply | 2 AA batteries (1.5 V) |
| Battery life | Approximately 10 hours |
| Laser range | Up to 20 meters |
| Accuracy | ± 0.5 mm/m |
| Main functions | Projection of horizontal and vertical lines, cross mode, self-leveling |
| Laser class | 2 (visible, < 1 mW) |
| Wavelength | 635 nm (red) |
| Housing material | ABS plastic |
| Mount | Tripod thread 1/4 inch |
| Operating temperature | -10°C to 50°C |
| Protection rating | IP54 |
| Included accessories | Tripod, carrying case, batteries |
| Maintenance and cleaning | Clean the lenses with a soft, dry cloth |
| Safety | Do not look directly into the laser beam; avoid eye exposure |
| Spare parts and repairability | Replacement batteries available; replaceable lenses |
| Warranty | 2 years |
Frequently Asked Questions - Laser Line LL 200V Weller
How to turn on the Laser Line LL 200V?
Insert the batteries, then press the ON/OFF button on the top of the device. A light indicator shows that the device is on.
How to calibrate the laser level?
Place the device on a stable surface and turn it on. The self-leveling system activates automatically. Wait a few seconds for the line to stabilize before use.
What is the maximum range of the laser?
The range can reach 20 meters in normal lighting conditions. For better visibility, use the laser receiver outdoors.
How to use cross mode?
Press the MODE button to switch between horizontal line, vertical line, and cross. Cross mode projects both lines simultaneously.
What to do if the laser does not turn on?
First check the battery orientation and charge level. If the problem persists, remove the batteries for 30 seconds and reinsert them. Contact customer service if necessary.
How to replace the batteries?
Open the battery compartment located under the device. Insert two AA batteries respecting polarity (+/-). Close the cover.
Is the laser waterproof?
Yes, the device has an IP54 rating, which protects against water splashes and dust. Do not immerse it.
How to clean the lenses?
Use a soft, dry cloth to gently wipe the lenses. Avoid chemical or abrasive products that could scratch the surface.
What is the accuracy of the laser level?
The stated accuracy is ± 0.5 mm/m, ensuring high precision for alignment work.
How to mount the device on a tripod?
Screw the tripod (not included) into the 1/4 inch thread under the device. Make sure the mount is tight.
User questions about Laser Line LL 200V Weller
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Laser Line LL 200V - Weller and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Laser Line LL 200V by Weller.
USER MANUAL Laser Line LL 200V Weller
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Weller
Model : Laser Line LL 200V
Category : Uncategorized