BST 90 - Uncategorized Eibenstock - Free user manual and instructions
Find the device manual for free BST 90 Eibenstock in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall Chaser / Groove Cutter |
| Brand | Eibenstock |
| Model | BST 90 |
| Power Supply | 230 V ~ 50 Hz |
| Rated Power Input | 2400 W |
| No-Load Speed | 4000 rpm |
| Max Cutting Depth | 35 mm |
| Max Cutting Width | 32 mm |
| Blade Diameter | 180 mm |
| Arbor Size | 22.2 mm |
| Weight | 6.8 kg |
| Dimensions (L x W x H) | 530 x 210 x 280 mm |
| Dust Extraction Port | 35 mm diameter |
| Protection Class | II (Double insulated) |
| Vibration Level | 3.0 m/s² |
| Sound Pressure Level | 90 dB(A) |
| Main Features | Adjustable cutting depth, integrated water cooling, safety clutch, diamond blade, dust extraction |
| Maintenance & Cleaning | Clean air vents regularly, check carbon brushes, lubricate spindle as per manual |
| Safety Precautions | Wear eye and ear protection, use dust mask, secure workpiece, disconnect before blade change |
| Spare Parts & Repairability | Available from Eibenstock service: blades, carbon brushes, bearings, switch |
Frequently Asked Questions - BST 90 Eibenstock
What is the maximum cutting depth of the BST 90?
The maximum cutting depth is 35 mm, adjustable via the depth stop.
Can the BST 90 cut concrete?
Yes, it is designed for cutting concrete, brick, and masonry using a diamond blade.
How do I change the diamond blade?
Disconnect power, press the spindle lock, use the provided wrench to loosen the blade bolt, remove and replace the blade.
Does the BST 90 have a dust extraction port?
Yes, it has a 35 mm dust extraction port for connecting a vacuum cleaner.
What is the weight of the BST 90?
The weight is approximately 6.8 kg.
Is the BST 90 suitable for dry cutting?
Yes, it can be used for dry cutting, but water cooling is recommended for prolonged use to extend blade life.
What type of blade does the BST 90 use?
It uses a 180 mm diameter diamond blade with a 22.2 mm arbor.
How often should I replace the carbon brushes?
Carbon brushes should be inspected after 50 hours of use and replaced when worn down to 5 mm.
Can the BST 90 be used for plunge cutting?
Yes, the depth adjustment allows progressive cutting; plunge cuts can be made by gradually lowering the blade.
Where can I find spare parts for the BST 90?
Spare parts are available through Eibenstock authorized service centers and selected retailers.
User questions about BST 90 Eibenstock
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual BST 90 - Eibenstock and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BST 90 by Eibenstock.
USER MANUAL BST 90 Eibenstock
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eibenstock
Model : BST 90
Category : Uncategorized