Zing TC33 - Measuring equipment Ermenrich - Free user manual and instructions
Find the device manual for free Zing TC33 Ermenrich in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Laser Distance Meter |
| Model | Zing TC33 |
| Brand | Ermenrich |
| Measurement Range | 0.05 to 30 m |
| Measurement Accuracy | ±2.0 mm |
| Units | m, ft, in |
| Laser Class | Class 2 (IEC 60825-1) |
| Power Supply | 2 × AAA batteries (1.5V) |
| Battery Life | Up to 5000 measurements |
| Display | Backlit LCD, 4 lines |
| Memory | Last 20 measurements |
| Auto Power Off | After 3 minutes of inactivity |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Dimensions | 120 × 55 × 28 mm |
| Weight | 120 g (with batteries) |
| Functions | Single distance, continuous, area, volume, indirect measurement, addition/subtraction |
| Maintenance | Clean lens with soft dry cloth; avoid solvents |
| Safety | Do not stare into beam; keep away from children |
| Spare Parts / Repairability | Replaceable batteries; no user-serviceable parts; contact support |
| Warranty | 2 years limited warranty |
Frequently Asked Questions - Zing TC33 Ermenrich
How do I turn on the Ermenrich Zing TC33?
Press the ON/MEASURE button once to power on the device.
What batteries does the Zing TC33 use?
It uses 2 AAA batteries (1.5V). Alkaline or rechargeable NiMH batteries are recommended.
How do I change the unit from meters to feet?
Press and hold the UNIT button for 2 seconds until the desired unit appears on the display.
What does 'Err' mean on the display?
'Err' indicates a measurement error. Common causes: target surface too reflective or too dark, out of range, or laser misaligned. Try measuring a different surface.
How accurate is the Zing TC33?
The typical accuracy is ±2.0 mm under optimal conditions (good target, stable surface, room temperature).
Can I use it outside in bright sunlight?
Yes, but performance may be reduced. Use the target plate (if included) or a non-reflective surface for better results.
How do I clean the laser lens?
Use a soft, dry cloth to gently wipe the lens. Do not use chemical cleaners or abrasive materials.
What is the maximum measurement range?
The maximum range is 30 meters under ideal conditions. Actual range may vary depending on lighting and target surface.
How do I perform area measurement?
Press the FUNC button until 'Area' appears. Measure length and width by pressing ON/MEASURE each time. The area will be displayed automatically.
Why won't my device turn on?
Check batteries: ensure correct polarity and that they are not depleted. Replace with fresh AAA batteries if needed. If still not working, contact support.
User questions about Zing TC33 Ermenrich
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual Zing TC33 - Ermenrich and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Zing TC33 by Ermenrich.
USER MANUAL Zing TC33 Ermenrich
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ermenrich
Model : Zing TC33
Category : Measuring equipment