AT-HDR-MX1616 - Switch Atlona - Free user manual and instructions
Find the device manual for free AT-HDR-MX1616 Atlona in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 16x16 HDMI Matrix Switcher |
| Brand | Atlona |
| Model | AT-HDR-MX1616 |
| Video Inputs | 16 x HDMI |
| Video Outputs | 16 x HDMI |
| Max Resolution | 4K@60Hz 4:4:4 (up to 18 Gbps) |
| HDCP Support | HDCP 2.2 and 1.4 |
| Audio Support | Embedded HDMI audio; digital audio extraction on output |
| Control Interfaces | Ethernet (TCP/IP), RS-232, IR, front panel buttons |
| Dimensions (W x D x H) | 17.2 x 10.6 x 3.5 inches (437 x 269 x 89 mm) |
| Weight | 12.5 lbs (5.7 kg) |
| Power Supply | 100-240 VAC; 50/60 Hz; internal, IEC connector |
| Power Consumption | 80W (max) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Mounting | Rack-mountable (2U) with included brackets |
| Key Features | Seamless switching, EDID management, IP control, front panel LCD |
| Maintenance | Keep vents clear; clean with dry cloth; no internal user-serviceable parts |
| Safety | Use grounded outlet; do not expose to moisture; operate in well-ventilated area |
| Spare Parts / Repairability | Contact Atlona support for authorized service; no user-replaceable parts |
| Warranty | 7-year limited warranty (with registration) |
Frequently Asked Questions - AT-HDR-MX1616 Atlona
How do I connect the AT-HDR-MX1616 to my network?
Connect an Ethernet cable from your router or switch to the LAN port on the rear panel. The unit will obtain an IP address via DHCP by default. Use the front panel LCD or web GUI to assign a static IP if needed.
Can the matrix switch 4K HDR signals?
Yes, the AT-HDR-MX1616 supports 4K@60Hz 4:4:4 (up to 18 Gbps) with HDR10 and Dolby Vision pass-through, provided the source and display are compatible.
How do I switch inputs/outputs without a computer?
Use the front panel buttons: press the OUT button to select an output, then press the IN button to choose the source. The LCD will confirm the routing.
What is EDID management and how do I use it?
EDID allows the source to know the display's capabilities. Access the EDID menu via the web GUI or RS-232. You can copy EDID from a connected display, use built-in presets, or upload custom EDID files.
Why is there no video on my display?
Check that the HDMI cable is firmly connected and the source is powered. Verify the input routing on the front panel or web GUI. Also ensure the display supports the resolution; try a lower resolution if needed.
Can I control the matrix via IP?
Yes, use the web GUI by entering the unit's IP address in a browser. Default credentials are admin/admin. You can also send Telnet or HTTP commands for automation.
How do I perform a factory reset?
Press and hold the MENU button on the front panel for 10 seconds until the LCD shows 'Factory Reset'. Select 'Yes' using the arrow buttons and press ENTER.
Does the switch support audio de-embedding?
Yes, the unit has digital audio outputs (TOSLINK and coaxial) on the rear panel that can extract audio from any HDMI input. Configure the audio mode via the Audio menu.
Is the AT-HDR-MX1616 HDCP 2.2 compliant?
Yes, it supports both HDCP 2.2 and HDCP 1.4 for compatibility with modern 4K sources and legacy devices.
How do I update the firmware?
Download the latest firmware from Atlona's support site. Access the web GUI, go to System > Firmware Update, browse for the file, and click Update. Do not power off during the process.
User questions about AT-HDR-MX1616 Atlona
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual AT-HDR-MX1616 - Atlona and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-HDR-MX1616 by Atlona.