DBB 90 HP - Basket TEKA - Free user manual and instructions
Find the device manual for free DBB 90 HP TEKA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Range hood |
| Brand | Teka |
| Model | DBB 90 HP |
| Width | 90 cm |
| Height (adjustable) | 60 - 120 cm |
| Depth | 50 cm |
| Net weight | 15 kg |
| Electrical supply | 220 - 240 V, 50 Hz |
| Maximum motor power | 200 W |
| Maximum airflow | 600 m³/h |
| Maximum noise level | 65 dB(A) |
| Number of speeds | 3 |
| Evacuation type | Ducted or recirculating |
| Grease filter | Washable aluminum |
| Carbon filter (optional) | Yes, adaptable |
| Lighting | LED, 2 x 1.5 W |
| Filter cleaning | Approx. every 2 months |
| Carbon filter replacement | Every 4 to 6 months |
| Automatic shut-off | Not specified |
| Spare parts available | Filters, bulbs, remote control |
| Warranty | 2 years (parts and labor) |
Frequently Asked Questions - DBB 90 HP TEKA
How to install the Teka DBB 90 HP range hood?
Installation must be carried out by a qualified professional. Ensure safety distances: the hood should be installed 65-75 cm above an electric cooktop and 75-85 cm above a gas cooktop. Securely fix the wall bracket and connect the exhaust duct.
What is the recommended mounting height for the DBB 90 HP range hood?
The recommended height is 65 to 75 cm for electric cooktops and 75 to 85 cm for gas cooktops. These distances ensure optimal suction and prevent overheating.
How to clean the grease filters of the hood?
The aluminum grease filters can be washed in the dishwasher or by hand with warm soapy water. Clean them every 2 months to maintain hood efficiency. Dry them completely before reinstalling.
How often should the carbon filter be replaced?
The carbon filter should be replaced every 4 to 6 months under normal use. It is not washable. A saturated filter reduces recirculation performance and may cause odors.
How to replace the LED lighting of the DBB 90 HP range hood?
Unplug the appliance. Open the bulb cover. Remove the old LED bulb and insert the new one respecting the specified power (1.5 W). Close the cover and plug back in. If the LEDs do not light up, check the connection.
What to do if the hood does not work?
First check the power supply and circuit breaker. Ensure the hood is properly plugged in. If the motor does not start, check the filters as they may be clogged. If the problem persists, contact Teka after-sales service.
How to use the recirculation function on the hood?
For recirculation mode, install a carbon filter (not supplied). Set the selector to recirculation. The air is filtered and returned to the room. Change the carbon filter regularly to maintain air quality.
Why is the hood making noise?
Abnormal noise may come from dirty filters, a blocked exhaust duct, or a faulty motor. Clean the filters and check the duct. If the noise persists, have the appliance checked by a professional. The normal noise level is around 65 dB(A).
Where to find spare parts for the DBB 90 HP range hood?
Spare parts such as filters, LED bulbs, and remote control are available from Teka authorized retailers or on the official website. Use the model number DBB 90 HP to order the correct parts.
Is the DBB 90 HP range hood compatible with an external motor?
Yes, this hood can be connected to an external centralized motor (not included). Consult a professional installer to adapt the exhaust duct. The maximum airflow of 600 m³/h must be compatible with the external motor.
User questions about DBB 90 HP TEKA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual DBB 90 HP - TEKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DBB 90 HP by TEKA.