DVT 680 - Range hood TEKA - Free user manual and instructions

Product type	Wall-mounted range hood
Brand	Teka
Model	DVT 680
Width	60 cm
Depth	30 cm
Height	40 cm (varies depending on installation)
Net weight	15 kg
Power supply	220-240 V ~ 50/60 Hz
Motor power	200 W
Number of speeds	3 speeds
Lighting type	LED
Number of bulbs	2
Maximum airflow	600 m³/h
Extraction mode	Extraction or recirculation
Filter type	Washable aluminum grease filter
Charcoal filter	Optional (recirculation model)
Control	Electronic push-button
Noise level	55 dB (A) at maximum speed
Maintenance	Clean the grease filter regularly (every 2 months)
Charcoal filter replacement	Every 6 months
Safety	Automatic shut-off in case of overheating
Spare parts	Filters, motor, bulbs available
Repairability	Repairability index estimated at 7.5/10

Frequently Asked Questions - DVT 680 TEKA

How to install the Teka DVT 680 hood?

Make sure the wall can support the weight. Attach the provided wall bracket, then hang the hood. Connect the air exhaust if necessary. Refer to the installation manual for precise dimensions.

How to clean the grease filters?

Remove the filters by pulling them downwards. Wash them by hand with dish soap or in the dishwasher at low temperature. Dry them before reinstalling. Perform this operation every 2 months.

How to replace the charcoal filter?

If your hood operates in recirculation mode, the charcoal filter must be replaced every 6 months. Open the cover, remove the old filter and insert the new one respecting the mounting direction.

What to do if the hood does not turn on?

First check the power supply and the circuit breaker. Then make sure the grease filter is properly in place. If the problem persists, contact Teka after-sales service.

How to adjust the suction speed?

Use the control button to select one of the 3 speeds. Speed 1 is for gentle cooking, speed 3 for strong odors or steam.

How to switch to recirculation mode?

If you cannot connect the hood to an external exhaust, install the charcoal filter (sold separately). The hood will then operate in closed circuit.

Why is my hood making noise?

Abnormal noise may come from a clogged filter or an object in the motor. Clean the filters and check that no foreign object is stuck. The normal noise level is about 55 dB.

How to change the LED bulb?

Cut off the power before handling. Remove the lighting cover, then disconnect the defective bulb. Connect a new LED bulb of the same type and close.

What is the recommended mounting height?

For gas cooking, the distance between the hood and the hob must be at least 65 cm; for electric or induction hobs, at least 55 cm.

Where to find spare parts?

Spare parts (filters, bulbs, motor) are available from Teka authorized dealers or on their official website. Use the reference DVT 680 to identify the correct parts.

USER MANUAL DVT 680 TEKA

Congratulations on your choice. We are certain that this modern, functional and practical device, made with first-rate quality materials, will fully satisfy your requirements.

Please read all the sections in this INSTRUCTION MANUAL before using the hood for the first time, in order to obtain maximum performance from the device and avoid faults which may arise from incorrect use, as well as minor problem solving.

For optimal performance, the external duct should not exceed FOUR METRES, have more than two 90° angles, and its diameter should be at least ∅120.

Safety Instructions

- Disconnect the device before performing any work on the interior, e.g., during cleaning or maintenance.

- The excessive accumulation of grease in the hood and metal filters may cause dripping and fire risks. Therefore, it is necessary to wash the inside of the hood and the metal filters at least once a month.

- This device can be used by children aged 8 and over and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or proper training in the safe use of the device and if they understand the dangers involved. Children should not play with the device. Cleaning and maintenance should be performed by the user and not by unsupervised children.

• Check that the power voltage and frequency match those indicated on the label located on the inside of the hood. A suitable earth must be connected (except for Class II devices, marked with □ on the technical data plate).
• For installation, a connection method isolated from the fixed installation should be incorporated, in accordance with installation regulations (adjusted to the strength to be endured and with a minimum opening between the contacts of 3mm) under overvoltage category III conditions, for the emergency shutdown, cleaning or light replacement. In no event should the earth pass through this switch. This switch can be replaced with a plug if it is accessible in normal use.
• If the power lead is damaged, it must be replaced by the manufacturer, its after-sales service, or by qualified personnel in order to avoid potential danger. • Air should not be extracted by ducts used to expel fumes from equipment powered by gas or other fuels.

• The room must be adequately ventilated when the hood will be used simultaneously with equipment powered by energy other than electricity, e.g. gas cookers. - The excessive accumulation of grease in the hood and metal filters may cause dripping and fire risks; therefore, it is necessary to wash the inside of the hood and the metal filters at least once a month. - Do not produce flames under the hood. - The bottom of the hood must be fitted at least 65 cm above gas or combination hobs. Observe the minimum limits set by the WORKTOP MANUFACTURER'S MINIMUM LIMITS. This distance may be reduced if mentioned in the hood installation instructions. - Never leave gas burning without a pan above it. The grease accumulated in the filters may drip or catch fire when the temperature is increased. - Avoid cooking under the hood if the metal filters are not fitted, e.g. while they are being cleaned in the dishwasher. • We recommend you wear gloves and use extra caution when cleaning the inside of the hood.

• Your hood is designed for domestic use and only for the extraction and purification of gases from food preparation. Use for other purposes is at your own risk and may be dangerous. The manufacturer is not responsible for damage caused by improper use of the device.
• For repairs, please contact the manufacturer's nearest Technical Assistance Department, which will always use genuine parts. Repairs or modifications by unauthorized personnel may result in damage to equipment or malfunction, endangering safety.
• This device complies with the European Directive 2002/96/EC on electrical and electronic devices entitled "Electrical and Electronic Equipment Waste". The directive provides the framework applicable throughout the European Union for the return and recycling of electrical and electronic equipment waste [symbol] responsible for his/her safety. Keep children away from the device and never let them play with it.

Instructions for use

You can activate or deactivate the cooker hood by operating the functions shown in the diagram.

Switch on the extractor fan a few minutes before you start to cook in order to ensure that a steady air flow has been established before fumes appear.

Allow the extractor fan to run for several minutes after you have finished cooking (between 3 to 5 minutes) in order to expel all the grease from the outlet duct. This prevents the return of grease, smoke and smells.

+	Increase fan speed
-	Reduce fan speed
88	Display
*	Light
→	Timer

Program the working time

1) Switch on the cooker hood and choose the required aspiration speed. 2) Push 'Timer'. 3) Select the required programming time from 1 to 99 minutes by using the buttons '+' and '-'. 4) The display will alternately show the clock and the remaining programming time. The maximum speed 'H' can only be selected manually and will be changed automatically to the second speed level after approximately 10 minutes.

Filter saturation indicator "F"

• When the sign 'Saturation of the filters' is on, the filters should be cleaned.
• After cleaning the filters, simultaneously press and hold "+" and "-" for at least 3 seconds; the indicator will then turn off.

Cleaning the metal filters

During cleaning and maintenance work, ensure compliance with the safety instructions.

Cleaning and maintenance

• If your kitchen hood is made of stainless steel, use proprietary cleaners mentioned in the product instructions.
• If your kitchen hood is painted, use lukewarm water and a neutral soap.
• Never use metallic scourers, nor abrasive or corrosive products.
• Dry the kitchen hood using a cloth that does not produce fibres.
• Do not use vapour cleaners.

Cleaning the hood body

• To remove the filters from their fittings, press lightly on the locks and then pull them off.
• The metal filters can be cleaned by soaking them in hot water with neutral detergent until the fat dissolves and then rinsing them under the tap or using special anti-grease products. They can also be washed in a dishwasher. In this case, it is advisable to stack them vertically to avoid food residues sticking to them.
• Cleaning in a dishwasher may damage the metallic surface (blackening it), although this will not affect its fat retention capacity.
• Once clean, leave them to dry off and then fit them onto the kitchen hood.

Changing light bulbs

Proceed as follows:

• Unscrew the lamp cover.
• Change the broken / burnt out lamp.
• Screw the lamp cover back in.

Problem solving

Proceed with the following checks before calling the Technical Service:

Problem Possible cause Solution
The kitchen hood does not work.	The mains cable is not connected to the network.There is no current in the network.	Connect the mains cable to the network.Provide current to the network.
The kitchen hood does not extract sufficiently or vibrates.	Filters are saturated with fat.Obstruction in the air outlet.	Change or clean the active charcoal and/or metal filters.Remove the obstruction.
The lamps do not light up.	The lamps are blownThe lamps are slack.	Change the lamps.Tighten the lamps.

Active charcoal filters (Optional)

When exterior gas extraction is not possible, then the kitchen hood may be set to purify the air by recycling it through active charcoal filters.

The active charcoal filters have an active life of between three to six months, depending on the individual conditions of use. These filters cannot be washed nor regenerated. They must be replaced once their useful life comes to an end.

The manufacturer reserves the right to make changes and corrections to its products as it deems necessary, without altering their basic characteristics.

Dear customer:

Teka Subsidiaries

Country Subsidiary	Address	City	Phone
AustriaKüppersbusch Austria	Eitnergasse, 13	1231 Wien	[phone]
BelgiumKüppersbusch Belgium S.P.R.L.	Doomveld Industrie, Asse 3, No. 11 - Boite 7	1731 Zellik	[phone]
BulgariaTeka Bulgaria EOOD	Blvd. "Tsarigradsko Shosse" 135	1784 Sofia	[phone]
ChileTeka Chile S.A.	Avd El Retiro Parque los Maitenes, 1237. Parque Enea	Pudahuel, Santiago de Chile	[phone]
ChinaTeka International Trading (Shanghai) Co. Ltd.	6/F. Datong Business Center, No. 369 Fuxing Middle Rd.	200025 Shanghai	[phone]
Czech RepublicTeka CZ S.R.O.	V Holesovickách, 593	182 00 Praha 8 - Liben	[phone]
EcuadorTeka Ecuador S.A.	Parque Ind. California 2, Via a Daule Km 12	Guayaquil	[phone]
Great BritainTeka Products Ltd.	177 Milton Park	0X14 4SE Milton, Abingdon	[phone]
GreeceTeka Hellas A.E.	Thesi Roupaki - Aspropyrgos	193 00 Athens	[phone]
HungaryTeka Hungary Kft.	Bajcsy Zsilinszky u. 53	1065 Budapest	[phone]
IndonesiaPT Teka Buana	Jalan Menteng Raya, Kantor Taman A9 Unit A3	12950 Jakarta	[phone]
MalaysiaTeka Küchentechnik (Malaysia) Sdn Bhd	10 Jalan Kartunis U1/47, Temasya Park, Off Glenmarie	40150 Shah Alam, Selangor Darul Ehsan	[phone]
MexicoTeka Mexicana S.A. de C.V.	Ferrocarril 200, Esquina Norte 29, Col. Moctezuma	15500 Mexico D.F.	[phone]
MoroccoTeka Maroc S.A.	73, Bd. Slimane, Depôt 33, Route de Ain Sebaa	Casablanca	[phone]
PolandTeka Polska Sp. ZO.O.	ul. 3-go Maja 8 / A2	05-800 Pruszków	[phone]
PortugalTeka Portugal S.A.	Estrada da Mota - Apdo 533	3834-909 Ilhavo, Aveiro	[phone]
RomaniaS.C. Teka Küchentechnik Romania S.R.L.	Sevastopol str., no 24, 5th floor, of. 15	010992 Bucharest Sector 1	[phone]
Russia/PоссияTeka Rus LLC/OOO "Teka Pyc"	ул.Барклая, д.6, сір.3, оф.402	121087 Россия, Москва	[phone]
SingaporeTeka Singapore PTE Ltd	Clemenceau Avenue, 83, 01-33/34 UE Square	239920 Singapore	[phone]
SpainTeka Industrial, S.A.	C/ Cajo,17	39011 Santander	[phone]
ThailandTeka (Thailand) Co. Ltd.	364/8 Sri-Ayuttaya Road, Phayathai, Ratchatavee	10400 Bangkok	[phone]
TurkeyTeka Teknik Mutfak Aletleri Sanayi Ve	Büyükdere Cad. 24/13	80290 Mecidiyekőy, Istanbul	[phone]
UkraineTeka Ukranie LLC	86-e, Bozhenko Str .2nd floor,4th entrance	03150 Kyiv	[phone]
United Arab EmiratesTeka Middle East Fze	Building LOB 16, Office 417	P.O. Box 18251 Dubai	[phone]
United Arab EmiratesTeka Küchentechnik U.A.E LLC	Bin Khedia Centre	P.O. Box 35142 Dubai	[phone]
VenezuelaTeka Andina S.A.	Ctra. Petare-Santa Lucia, km 3 (El Limoncito)	1070 Caracas	[phone]
VietnamTEKA Vietnam Co., Ltd.	803 Dai Minh Convention Tower, 8th Floor	77 Hoang Van Thai, District 7, Ho Chi Minh	[phone]