STL-PR-304 - Faucet FRANKE - Free user manual and instructions
Find the device manual for free STL-PR-304 FRANKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Kitchen faucet |
| Brand | Franke |
| Model | STL-PR-304 |
| Height | Approximately 35 cm |
| Depth | Approximately 25 cm |
| Weight | Approximately 2 kg |
| Power supply | Mechanical (no electricity) |
| Recommended water pressure | 1 to 5 bars |
| Maximum water temperature | 80 °C |
| Spout type | Swivel spout |
| Main function | Single-lever mixer |
| Material | Chrome-plated brass |
| Maintenance and cleaning | Clean with a soft cloth and soapy water. Avoid abrasive products. |
| Safety | Complies with current standards (NF, EN) |
| Spare parts | Seals, cartridge, aerator |
| Repairability | Parts available separately (repairability index available online) |
| Warranty | 5 years (subject to conditions) |
Frequently Asked Questions - STL-PR-304 FRANKE
What is the minimum water pressure required for this faucet?
The recommended water pressure is between 1 and 5 bars. A pressure below 1 bar may reduce the flow rate.
How to install the STL-PR-304 faucet?
Installation requires fixing the faucet to the sink or worktop using the supplied nuts. Connect the water supply hoses (hot and cold) to the valves. Tighten by hand then check for leaks.
What to do if the faucet leaks at the base?
A leak at the base may be due to a worn seal or insufficient tightening. Replace the sealing gasket or tighten the fixing nut with an appropriate wrench.
How to maintain the faucet to keep its chrome finish?
Clean regularly with a soft cloth and soapy water. Avoid abrasive or chlorine-containing products. Dry after cleaning.
Can I use a steam cleaner on this faucet?
It is not recommended to use a steam cleaner as heat and pressure could damage the seals and chrome finish.
How to replace the mixer cartridge?
Turn off the water supply, unscrew the small screw under the lever, remove the lever, then disassemble the retaining ring. Replace the defective cartridge with a new one (compatible reference). Reassemble in reverse order.
Is the faucet compatible with a tankless water heater?
Yes, provided that the pressure and temperature comply with the faucet limits (1-5 bars, 80°C max). Check compatibility with your water heater.
What is the warranty for the Franke STL-PR-304 faucet?
The warranty is 5 years for parts and labor (excluding abnormal use or installation defects). Keep the receipt.
Where to find spare parts for this model?
Spare parts (seals, cartridge, aerator) are available from Franke authorized dealers or spare parts websites. Use the reference STL-PR-304.
Can the faucet spout swivel?
Yes, the spout is swivel for easy use in a double-basin sink.
User questions about STL-PR-304 FRANKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Faucet in PDF format for free! Find your manual STL-PR-304 - FRANKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. STL-PR-304 by FRANKE.
USER MANUAL STL-PR-304 FRANKE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FRANKE
Model : STL-PR-304
Category : Faucet