Lina TA9901 - Faucet FRANKE - Free user manual and instructions
Find the device manual for free Lina TA9901 FRANKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Kitchen Faucet |
| Brand | Franke |
| Model | Lina TA9901 |
| Installation Type | Deck Mounted (Single Hole) |
| Material | Brass |
| Finish | Chrome |
| Handle Type | Single Lever |
| Spout Type | High Arc with Pull-Down Spray Head |
| Swivel Range | 360 Degrees |
| Flow Rate | 1.5 GPM (5.7 L/min) at 60 psi |
| Cartridge Type | Ceramic Disc |
| Valve Type | Single Handle |
| Spout Height | 15.75 inches (400 mm) |
| Spout Reach | 8.75 inches (222 mm) |
| Overall Height | 17.5 inches (445 mm) |
| Weight | 4.2 lbs (1.9 kg) |
| Warranty | Limited Lifetime |
| Certifications | cUPC, NSF 61, WaterSense |
| Connection Size | 3/8 inch compression |
| Includes | Faucet, pull-down spray head, supply lines, mounting hardware |
| Care & Cleaning | Wipe with a damp cloth; avoid abrasive cleaners |
| Spare Parts | Available through Franke customer service |
Frequently Asked Questions - Lina TA9901 FRANKE
What is the warranty for the Franke Lina TA9901 faucet?
The Franke Lina TA9901 comes with a limited lifetime warranty covering defects in materials and workmanship for the original purchaser. Proof of purchase is required.
How do I install the Lina TA9901 faucet?
Installation is a deck-mount single-hole setup. Follow the included manual: insert the faucet through the sink hole, secure with mounting nut, connect supply lines to 3/8 inch compression shut-off valves, and attach spray head hose. Turn on water and check for leaks.
Can I install this faucet on a three-hole sink?
The Lina TA9901 is designed for a single-hole configuration. For three-hole sinks, you will need a deck plate (escutcheon) to cover the extra holes, which is not included.
How do I clean the Franke Lina TA9901?
Clean with a soft, damp cloth and mild soap. Avoid abrasive pads, harsh chemicals, or cleaners containing ammonia, bleach, or acids. Rinse and dry to prevent water spots.
The faucet leaks from the handle: what should I do?
Leaking from the handle often indicates a worn ceramic disc cartridge. Turn off water supply, remove the handle (set screw underneath), unscrew the cartridge retainer, replace the cartridge, and reassemble. If still leaking, contact Franke support.
What is the flow rate of this faucet?
The maximum flow rate is 1.5 gallons per minute (5.7 liters per minute) at 60 psi. It meets WaterSense standards for water efficiency.
Is the pull-down spray head detachable?
The spray head is attached by a flexible hose and can be pulled down for use. It is not fully detachable; it returns to the spout via a magnetic docking system.
How do I remove the spray head for cleaning?
The spray head can be unscrewed from the hose at the connection point. Use a wrench on the hex nut below the spray head. Clean the aerator and nozzles, then reattach firmly.
Does the faucet come with supply lines?
Yes, the Lina TA9901 includes two 3/8 inch compression supply lines (hot and cold). They are commonly 20 inches long, but you may need longer lines depending on your setup.
Where can I find replacement parts for the Franke Lina TA9901?
Replacement parts, including cartridges, spray hoses, and handles, can be ordered through Franke customer service or authorized dealers. Have your model number ready.
User questions about Lina TA9901 FRANKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Faucet in PDF format for free! Find your manual Lina TA9901 - FRANKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Lina TA9901 by FRANKE.
USER MANUAL Lina TA9901 FRANKE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FRANKE
Model : Lina TA9901
Category : Faucet