ASROCK

X370 Pro BTC+ - Motherboard ASROCK - Free user manual and instructions

Find the device manual for free X370 Pro BTC+ ASROCK in PDF.

📄 166 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ASROCK X370 Pro BTC+ - page 6
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Motherboard
Brand ASRock
Model X370 Pro BTC+
Form Factor ATX
CPU Socket AM4
Chipset AMD X370
Supported Memory Type DDR4
Number of Memory Slots 4
Maximum Memory Capacity 64 GB
Supported Memory Frequency Up to 3200 MHz (OC)
Number of PCI Express Slots 13 (x1 or x16 depending on configuration)
M.2 Slots 1 (M.2 2230/2242/2260/2280)
SATA Ports 8
Network Connectivity Gigabit Ethernet (Realtek RTL8111GR)
Audio Realtek ALC892 (7.1 channels)
Required Power 1x 24-pin ATX, 1x 8-pin EPS, 4x 4-pin Molex
Dimensions 305 mm x 244 mm
Weight Approximately 1.2 kg
Operating Temperature 0 °C to 50 °C
Main Features Support for 13 GPUs, BIOS optimized for mining, auxiliary PCIe power
Maintenance Clean with compressed air, avoid humidity
Safety Protection against overvoltage and electrostatic discharge
Included Accessories SATA cables, rear I/O shield, user manual

Frequently Asked Questions - X370 Pro BTC+ ASROCK

How many GPUs can I install on the ASRock X370 Pro BTC+ motherboard?
You can install up to 13 GPUs thanks to the 13 PCI Express slots. However, make sure your power supply is powerful enough and your GPUs are properly cooled.
What type of processor is compatible with this motherboard?
The motherboard supports AMD Ryzen processors (1000, 2000, and 3000 series) with AM4 socket. Check the compatibility list on the ASRock website.
What is the recommended power supply wattage for a mining configuration?
For 13 GPUs, it is recommended to use two power supplies (e.g., 1200W + 1200W) or a single high-wattage unit (>2000W). The board itself consumes little, but each GPU may require 150-300W.
How to configure the BIOS for mining?
In the BIOS, enable Above 4G Decoding and set Gen2 for PCIe slots. Disable unnecessary peripherals (audio, serial ports). Use the predefined mining profile if available.
Is this motherboard suitable for Ethereum mining?
Yes, it is specially designed for cryptocurrency mining like Ethereum. Its 13 PCIe slots allow connection of many graphics cards.
Can I use NVIDIA and AMD GPUs together on this board?
Yes, the motherboard supports mixing NVIDIA and AMD GPUs. However, you may need to adjust drivers and operating system settings.
What is the maximum operating temperature of the motherboard?
The operating temperature is between 0°C and 50°C. Beyond that, components may be damaged. Ensure good ventilation.
How to update the BIOS of the motherboard?
Download the latest BIOS version from the ASRock website, put it on a USB drive formatted as FAT32, then use the Instant Flash utility in the BIOS.
Where can I find drivers for this motherboard?
Drivers are available on the ASRock product support page: https://www.asrock.com/support/. Download those for your operating system.
Is the motherboard compatible with Windows 10?
Yes, it is compatible with Windows 10 (64-bit). ASRock provides drivers for Windows 10. Linux is also widely used for mining.

User questions about X370 Pro BTC+ ASROCK

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Motherboard in PDF format for free! Find your manual X370 Pro BTC+ - ASROCK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X370 Pro BTC+ by ASROCK.

USER MANUAL X370 Pro BTC+ ASROCK

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ASROCK

Model : X370 Pro BTC+

Category : Motherboard