Rack E3C246D4I-2T - Motherboard ASROCK - Free user manual and instructions
Find the device manual for free Rack E3C246D4I-2T ASROCK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server Motherboard |
| Form Factor | Mini-ITX |
| Dimensions | 6.7 x 6.7 inches (170 x 170 mm) |
| Weight | Approximately 0.5 kg (1.1 lbs) |
| Power Supply | 24-pin ATX + 8-pin EPS |
| Chipset | Intel C246 |
| CPU Socket | LGA1151 |
| Supported CPUs | Intel Xeon E-2100/E-2200, 8th/9th Gen Core i3, Pentium, Celeron |
| Memory Slots | 2 x DDR4 DIMM |
| Maximum Memory | 64 GB |
| Memory Type | DDR4 ECC Unbuffered (UDIMM) |
| Storage Interfaces | 4 x SATA3 (6 Gbps), 1 x M.2 (PCIe3 x4 or SATA3) |
| Networking | Dual Intel X550-AT2 10GbE |
| Remote Management | Aspeed AST2500 BMC with IPMI 2.0 |
| Expansion Slots | 1 x PCIe 3.0 x16 |
| USB Ports | 2 x USB 3.1 Gen1 (rear), 2 x USB 2.0 (via header) |
| Video Output | 1 x VGA via BMC |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Maintenance | Keep clean from dust; avoid static discharge |
| Safety | Use a compatible power supply; install in a grounded enclosure |
| Spare Parts | Contact ASRock Rack support for replacement I/O shield, screws, etc. |
| General Information | ASRock Rack E3C246D4I-2T is a Mini-ITX server board designed for Intel Xeon E-2100/2200 processors, featuring dual 10GbE, IPMI remote management, and ECC memory support. |
Frequently Asked Questions - Rack E3C246D4I-2T ASROCK
What CPUs are compatible with the ASRock Rack E3C246D4I-2T?
The motherboard supports Intel Xeon E-2100/E-2200 series, 8th/9th Gen Core i3, Pentium, and Celeron processors with LGA1151 socket.
What type of RAM does this motherboard support?
It supports DDR4 ECC Unbuffered (UDIMM) memory, up to 64 GB total across two DIMM slots. Non-ECC memory is also compatible but not recommended for server use.
How do I access the IPMI remote management?
Connect to the dedicated IPMI LAN port or share the primary LAN port. Default IP is 192.168.0.10. Use a web browser to log in with username 'admin' and password 'admin' (change on first login).
Does the E3C246D4I-2T support M.2 NVMe SSDs?
Yes, the M.2 slot supports PCIe 3.0 x4 NVMe drives as well as SATA3 M.2 SSDs. Check the manual for supported lengths (up to 2280).
What power supply is required?
The board requires a standard ATX power supply with a 24-pin main connector and an 8-pin EPS12V CPU power connector. A PSU of at least 350W is recommended.
How can I update the BIOS?
Download the latest BIOS from ASRock Rack's website, save it to a FAT32 USB drive, boot into the UEFI setup, and use the Instant Flash tool. Alternatively, use IPMI KVM to update.
What is the maximum operating temperature?
The recommended operating temperature range is 0°C to 40°C (32°F to 104°F). Ensure adequate airflow in the chassis.
Is ECC memory required?
ECC memory is not mandatory but is strongly recommended for stability and error correction, especially in server environments. The board supports ECC UDIMMs only.
How many SATA drives can I connect?
The motherboard has four SATA3 ports (6 Gbps) from the chipset. For additional storage, use the M.2 slot or a PCIe expansion card.
What should I do if the system does not boot?
Check all power connections (24-pin, 8-pin), ensure the CPU and memory are properly seated, clear CMOS by shorting the CLRCMOS jumper, and verify the PSU is functional. If using IPMI, check the BMC health.
User questions about Rack E3C246D4I-2T ASROCK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motherboard in PDF format for free! Find your manual Rack E3C246D4I-2T - ASROCK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Rack E3C246D4I-2T by ASROCK.
USER MANUAL Rack E3C246D4I-2T ASROCK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ASROCK
Model : Rack E3C246D4I-2T
Category : Motherboard