AC-08000 - Air conditioner NewAir - Free user manual and instructions
Find the device manual for free AC-08000 NewAir in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Portable monoblock air conditioner |
| Brand | NewAir |
| Model | AC-08000 |
| Cooling capacity | 8 000 BTU/h (2 344 W) |
| Recommended area | Up to 28 m² |
| Power supply | 115 V ~ 60 Hz |
| Power consumption (cooling) | ~ 900 W |
| Dimensions (W × D × H) | 45,7 × 35,6 × 71,1 cm |
| Net weight | 26,3 kg |
| Noise level | ~ 55 dB (in high mode) |
| Refrigerant | R410A |
| Operating modes | Cooling, Fan, Dehumidification |
| Thermostat | Digital, range from 16 °C to 32 °C |
| Timer | Programmable delayed shut-off (1-24 h) |
| Remote control | Included (with AAA batteries) |
| Air filter | Washable and reusable |
| Exhaust kit | Exhaust hose and window adapter included |
| Maintenance | Clean the filter every 2 weeks |
| Repairability | Spare parts available on the manufacturer's website |
| Safety | Automatic shut-off in case of overheating, anti-freeze protection |
Frequently Asked Questions - AC-08000 NewAir
How to clean the filter of the NewAir AC-08000 air conditioner?
Turn off the unit and unplug it. Open the front grille and remove the filter. Wash it with warm soapy water, rinse and dry completely before reinstalling. Clean the filter every two weeks.
What to do if the air conditioner does not cool enough?
Check that the filter is clean, the windows and doors are closed, and the exhaust hose is not blocked or bent. Make sure the unit's capacity (8000 BTU) matches the room size.
How to use the remote control?
Insert two AAA batteries (not included) into the remote. Point it at the unit's receiver. The buttons allow you to adjust temperature, fan speed, mode, and timer.
What does error code E1 mean?
Error code E1 indicates a fault with the room temperature sensor. Turn off the unit, unplug it, and contact customer service.
Can I use the unit without the exhaust hose?
No, the air conditioner must be used with the exhaust hose connected to a window or opening to expel hot air. Without it, the unit will not cool effectively.
How to set the timer?
Press the 'Timer' button on the remote. Use the + or - arrows to select the number of hours (1 to 24). The unit will turn off automatically at the end of the countdown.
What is the power consumption in standby mode?
In standby mode, the air conditioner consumes less than 2 W. It is recommended to unplug the unit during prolonged absence.
How to empty the condensation tank?
The unit normally expels moisture through the exhaust hose. In dehumidification mode, an internal tank may fill; remove the drain plug at the back to empty the water.
The air conditioner is making noise, is this normal?
Yes, a noise level of around 55 dB is normal for a portable air conditioner. Make sure the unit is level and the screws are tightened to reduce vibrations.
Where can I find spare parts?
Spare parts (filter, remote control, hose) are available on the NewAir official website or from authorized dealers. Contact customer service to order.
User questions about AC-08000 NewAir
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual AC-08000 - NewAir and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AC-08000 by NewAir.
USER MANUAL AC-08000 NewAir
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NewAir
Model : AC-08000
Category : Air conditioner