AC-14100H - Air conditioner NewAir - Free user manual and instructions
Find the device manual for free AC-14100H NewAir in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Model | AC-14100H |
| Brand | NewAir |
| Cooling Capacity | 14,000 BTU (ASHRAE) / 10,000 BTU (DOE) |
| Coverage Area | Up to 600 sq. ft. |
| Dimensions (W x D x H) | 18.0 x 14.5 x 28.5 inches |
| Weight | 70 lbs |
| Power Supply | 115V AC / 60Hz / 10.5 Amps |
| Power Cord Length | 5.9 ft |
| Modes | Cool, Fan, Dehumidify |
| Fan Speeds | Low, Medium, High |
| Remote Control | Included |
| Timer | 24-hour programmable timer |
| Sleep Mode | Yes |
| Auto Restart | Yes |
| Filter Type | Washable mesh filter |
| Recommended Filter Cleaning | Every 2 weeks |
| Water Drainage | Self-evaporating (no bucket required in most conditions) |
| Hose Length | 5 ft (exhaust hose included) |
| Window Kit | Included (fits horizontally sliding windows up to 48 in.) |
| Refrigerant | R410A |
| Certifications | ETL listed |
| Warranty | 1 year limited |
Frequently Asked Questions - AC-14100H NewAir
How do I install the NewAir AC-14100H portable air conditioner?
First, attach the exhaust hose to the back of the unit. Then, insert the window kit into a sliding window and secure it. Connect the hose to the window kit. Plug the unit into a grounded outlet. Ensure the unit is level and there are no obstructions.
How do I drain water from the AC-14100H?
The unit features self-evaporation technology, so manual drainage is rarely needed. However, in very humid conditions, water may collect. To drain, remove the bottom drain plug and allow water to flow into a pan or hose. Always turn off the unit before draining.
How often should I clean the air filter?
Clean the washable mesh filter every 2 weeks for optimal performance. Remove the filter, rinse with lukewarm water, let it dry completely, and reinsert. Do not use harsh chemicals or run the unit without the filter.
Can I use an extension cord with this air conditioner?
It is not recommended. The unit draws up to 10.5 amps and requires a dedicated circuit. If you must use an extension cord, use a 14-gauge or heavier cord rated for at least 15 amps, and keep it as short as possible.
What does the error code 'E1' mean?
Error code E1 indicates a malfunction in the room temperature sensor. Clean the sensor and check for loose connections. If the error persists, contact NewAir support.
How do I set the timer on the AC-14100H?
Press the Timer button on the remote or control panel. Use the +/- buttons to set the desired hours (1-24). Press Timer again to confirm. The unit will automatically turn on or off after the set time.
Does this air conditioner have a heating function?
No, the AC-14100H is a cooling-only portable air conditioner. It does not provide heat. For heating, consider a separate heater or a heat pump model.
How should I store the AC-14100H during winter?
Drain any remaining water, clean the filter, and let the unit dry completely. Disconnect the exhaust hose and window kit. Store the unit in a dry, cool place. Cover it with a cloth or plastic to protect from dust.
Is the NewAir AC-14100H energy efficient?
It has a CEER rating (Combined Energy Efficiency Ratio) of approximately 8.5, which is standard for portable units. Use sleep mode and set the thermostat wisely to save energy.
What spare parts are available for this model?
Common spare parts include the remote control, washable filter, exhaust hose, and window kit. Contact NewAir or authorized retailers for replacements.
User questions about AC-14100H NewAir
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual AC-14100H - NewAir and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AC-14100H by NewAir.