Bell 4 - Speaker ELIPSON - Free user manual and instructions
Find the device manual for free Bell 4 ELIPSON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | 2-way bookshelf speaker |
| Brand | Elipson |
| Model | Bell 4 |
| Category | Loudspeaker |
| Speaker type | Bass-reflex with rear port |
| Woofer | 1 × 4 inch (100 mm) cellulose |
| Tweeter | 1 × 1 inch (25 mm) soft dome |
| Nominal impedance | 8 Ω |
| Sensitivity | 88 dB / 1 W / 1 m |
| Power handling | 50 W RMS, 100 W peak |
| Frequency response | 60 Hz – 20,000 Hz (±3 dB) |
| Crossover frequency | 3,000 Hz |
| Dimensions (W × H × D) | 150 × 250 × 200 mm |
| Unit weight | 3.8 kg |
| Cabinet material | MDF with walnut veneer or black finish |
| Connectors | Gold-plated screw terminals (bi-wiring possible) |
| Main features | Stereo sound reproduction, compatible with Hi-Fi amplifier |
| Care and cleaning | Dust with a soft, dry cloth. Do not use chemical products. |
| Safety | Do not expose to moisture or heat sources. Use on a stable surface. |
| Spare parts and repairability | The speakers are replaceable via authorized service. No consumer spare parts. |
| General information | User manual available for PDF download. 2-year warranty. |
Frequently Asked Questions - Bell 4 ELIPSON
What is the recommended amplifier power?
An amplifier of 20 to 80 W RMS at 8 Ω is ideal for Bell 4 speakers.
Can I bi-wire or bi-amp the Bell 4?
Yes, the terminals are designed for bi-wiring and passive bi-amping. Remove the metal jumpers between HF and LF terminals.
What is the ideal distance between speakers and the wall?
Place the speakers at least 20 cm from the rear wall to avoid excessive bass due to the bass-reflex port.
How do I clean the Bell 4 speakers?
Use a soft, dry cloth to dust the cabinet. Avoid any liquid or abrasive products.
What is the break-in time for Bell 4?
Allow approximately 50 to 100 hours of listening at moderate volume for the suspensions to loosen and the sound to open up.
Can I use the Bell 4 as surround speakers?
Yes, they are suitable both as main and surround speakers in a home theater system.
What if a speaker buzzes or stops working?
Check connections and ensure no debris. If the problem persists, contact Elipson support for a speaker replacement.
Are the speakers magnetically shielded?
No, they are not shielded. Keep them at least 50 cm away from a CRT television.
What type of speaker cable do you recommend?
Use a cable with a cross-section of 2.5 mm² for lengths up to 5 meters, with banana plugs or spade connectors.
Where can I find the full user manual?
Download the PDF for free from notice-facile.com or the official Elipson website.
User questions about Bell 4 ELIPSON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Bell 4 - ELIPSON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Bell 4 by ELIPSON.
USER MANUAL Bell 4 ELIPSON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELIPSON
Model : Bell 4
Category : Speaker