INF IC6 - Speaker ELIPSON - Free user manual and instructions
Find the device manual for free INF IC6 ELIPSON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | In-wall speaker |
| Model | INF IC6 |
| Brand | Elipson |
| Dimensions (W x H x D) | 245 x 245 x 90 mm |
| Speaker diameter | 165 mm (woofer) + 25 mm (tweeter) |
| Weight | 1.9 kg |
| Power handling | 80 W RMS |
| Frequency response | 60 Hz – 20 kHz |
| Impedance | 8 Ω |
| Power supply | Passive (requires external amplifier) |
| Main functions | Sound reproduction with wide dispersion; removable magnetic grille; parallel wiring possible |
| Maintenance and cleaning | Dust the grille with a soft dry cloth; do not use abrasive products |
| Safety | Respect the amplifier's maximum power; do not expose to excessive humidity |
| Spare parts and repairability | Replacement grille available; speaker repairable by a professional |
| General information | Designed for recessed wall installation; supplied with cut-out template and hardware |
Frequently Asked Questions - INF IC6 ELIPSON
What are the cut-out dimensions required to install the Elipson INF IC6 speaker?
The required cut-out is 195 x 195 mm. Use the supplied template for accurate marking.
Can I use this speaker with a 100 W amplifier?
Yes, the speaker handles up to 80 W RMS, but a 100 W amplifier can be suitable provided you do not turn the volume up full to avoid damaging the speaker.
How to clean the speaker grille?
Remove the magnetic grille and dust it with a soft dry cloth. Avoid any chemical or abrasive products.
What type of cable to use for connection?
Use a speaker cable with cross-section 1.5 to 2.5 mm². Observe polarity (+ and -) for good sound reproduction.
Is the speaker suitable for outdoor installation?
No, this speaker is designed for indoor use only. It is not waterproof or weather-resistant.
Can I paint the speaker grille?
Yes, the grille can be painted to match your décor. Use an acrylic spray paint, applying thin and even coats.
What is the impedance of the Elipson INF IC6 speaker?
The impedance is 8 ohms. Check compatibility with your amplifier for optimal performance.
Is the speaker supplied with a cut-out template?
Yes, a cut-out template is included to facilitate wall installation. Follow the instructions in the manual for a perfect recessed installation.
How to fix the speaker to the ceiling or wall?
Use the included mounting tabs. Tighten the screws until the speaker is firmly held without deforming the wall material.
What to do if the sound is distorted or hisses?
Check the connections, polarity, and amplifier power. If the problem persists, contact an authorized Elipson technician.
User questions about INF IC6 ELIPSON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual INF IC6 - ELIPSON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. INF IC6 by ELIPSON.
USER MANUAL INF IC6 ELIPSON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELIPSON
Model : INF IC6
Category : Speaker