Fresh AP-120W - Air purifier WILFA - Free user manual and instructions
Find the device manual for free Fresh AP-120W WILFA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Wilfa |
| Model | Fresh AP-120W |
| Product type | Air purifier |
| Dimensions (L x W x H) | 30 x 30 x 50 cm |
| Weight | 5 kg |
| Power supply | 220-240 V, 50 Hz |
| Power consumption | 50 W |
| Coverage area | Up to 30 m² |
| Filtration technology | HEPA filter + activated carbon + pre-filter |
| Max air flow | 200 m³/h |
| Noise level | 25 - 50 dB (A) |
| Number of speeds | 3 speeds + sleep mode |
| Timer | Yes, up to 8 hours |
| Air quality sensor | Yes, with LED indicator |
| Night mode | Yes, reduced brightness |
| Filter replacement indicator | Yes |
| Maintenance and cleaning | Clean the pre-filter with a vacuum cleaner every month; replace the HEPA/charcoal filter every 6 to 12 months depending on usage |
| Safety | Automatic shut-off if tipped over; child lock (lockable buttons) |
| Spare parts available | HEPA filter (AP-120W-HEPA), charcoal filter (AP-120W-CARB) |
| Repairability | Repairability score: 7.5/10 |
| Included accessories | Power cable, user manual |
Frequently Asked Questions - Fresh AP-120W WILFA
How to install the Wilfa Fresh AP-120W air purifier?
Place the unit on a flat surface, at least 30 cm away from walls and furniture. Plug in the power cable. Press the On/Off button. Select the desired speed using the speed button.
How often should the filters be changed?
The pre-filter should be cleaned every month with a vacuum cleaner. The HEPA filter and charcoal filter should be replaced every 6 to 12 months depending on usage. The filter replacement indicator will alert you.
What area can the Wilfa Fresh AP-120W cover?
This air purifier is designed for rooms up to 30 m². For optimal efficiency, adjust the speed according to room size and pollution level.
How to use the timer?
Press the Timer button to set the operating time (1, 2, 4, or 8 hours). The unit will automatically turn off once the time has elapsed.
Is night mode quiet?
Yes, night mode reduces speed and turns off the lights for near-silent operation (<25 dB). It is ideal for use in the bedroom.
How to clean the pre-filter?
Unplug the unit. Open the back panel. Slide out the pre-filter. Vacuum the dust with a vacuum cleaner fitted with a brush. Reinsert the pre-filter and close the panel.
What does the red LED indicator mean?
The indicator color reflects air quality: blue = good, green = average, red = poor. If the indicator stays red, increase the speed or check the filter.
Can I use essential oils on the purifier?
No, it is not recommended to add essential oils as they can damage the filters and the unit. Use a separate diffuser if desired.
How to reset the filter replacement indicator?
After replacing the filter, plug in the unit. Press and hold the speed button for 3 seconds until the light flashes and then turns off.
Where to find replacement filters?
Filters are available from authorized Wilfa dealers or online. Look for references: AP-120W-HEPA for the HEPA filter and AP-120W-CARB for the charcoal filter.
User questions about Fresh AP-120W WILFA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air purifier in PDF format for free! Find your manual Fresh AP-120W - WILFA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fresh AP-120W by WILFA.
USER MANUAL Fresh AP-120W WILFA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WILFA
Model : Fresh AP-120W
Category : Air purifier