Zelos - Lighting BeamZ - Free user manual and instructions
Find the device manual for free Zelos BeamZ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Moving Head Light |
| Model | Zelos |
| Brand | BeamZ |
| Light Source | 60W RGBW LED |
| Beam Angle | 15° |
| DMX Channels | 11/13/15 channels |
| Control Modes | DMX, Master/Slave, Auto, Sound |
| Pan/Tilt | 540°/180° |
| Strobe Rate | 0-20 Hz |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 80W |
| Dimensions (L x W x H) | 250 x 220 x 320 mm |
| Weight | 3.5 kg |
| Housing Material | Metal and ABS plastic |
| Cooling System | Active fan cooling |
| IP Rating | IP20 (indoor use only) |
| Included Accessories | Power cord, DMX cable, mounting bracket, user manual |
| Maintenance | Clean lens with soft dry cloth; ensure adequate ventilation |
| Safety | Do not stare into beam; install securely; disconnect power before cleaning |
| Repairability | Replaceable LED module and power supply unit |
Frequently Asked Questions - Zelos BeamZ
How do I connect the BeamZ Zelos to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX output of your controller to the DMX input of the Zelos. Set the DMX address on the unit using the control panel. Make sure to terminate the last fixture with a 120Ω resistor.
What is the power consumption of the Zelos?
The Zelos consumes approximately 80W at full power. It operates on AC 100-240V, 50/60Hz. Always use a grounded power outlet.
Can I use the Zelos without a DMX controller?
Yes, the Zelos has built-in auto programs and sound-active modes. Select these modes via the control panel. It can also work in master/slave mode for synchronized light shows.
How do I clean the lens of the Zelos?
Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner. Gently wipe the lens. Do not use abrasive cleaners or solvents.
What does the strobe function do?
The strobe function rapidly flashes the LED at a frequency between 0 and 20 Hz. This creates a flickering effect. It can be controlled via DMX or adjusted manually.
Is the BeamZ Zelos suitable for outdoor use?
No, the Zelos has an IP20 rating, meaning it is only protected against solid objects larger than 12.5 mm and is not waterproof. Use it only indoors or in covered areas protected from moisture.
How do I set up master/slave mode?
Connect multiple Zelos fixtures with DMX cables. On the first unit (master), select the desired program. On the other units (slaves), set them to slave mode. The slaves will follow the master’s commands.
What is the beam angle of the Zelos?
The beam angle is 15 degrees, producing a tight focused beam suitable for spotlight effects. For a wider wash, consider using a diffuser accessory.
How often should I replace the LED module?
The LED module is rated for approximately 50,000 hours. Replacement should be done by a qualified technician if the light becomes dim or fails. Check the manual for detailed instructions.
What does the DMX address setting mean?
The DMX address is the starting channel for controlling the fixture. For a 11-channel fixture, set the first fixture to address 1, the second to 12, the third to 23, etc. Ensure no two fixtures share the same starting address.
User questions about Zelos BeamZ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Zelos - BeamZ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Zelos by BeamZ.
USER MANUAL Zelos BeamZ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BeamZ
Model : Zelos
Category : Lighting