BCC145 - Lighting BeamZ - Free user manual and instructions
Find the device manual for free BCC145 BeamZ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Projector |
| Light Source | 100W LED |
| Luminous Flux | 10,000 lumens |
| Beam Angle | 25° |
| Dimensions (L x W x H) | 250 x 200 x 300 mm |
| Weight | 2.5 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 150 W |
| Main Functions | DMX512, automatic and master/slave modes, strobe, color fader |
| Maintenance and Cleaning | Clean the lenses with a soft, dry cloth |
| Safety | Do not expose to moisture, use a grounded outlet |
| Spare Parts | Replacement fuse, integrated LED module |
| Repairability | Repair by a qualified technician recommended |
| Protection Rating | IP20 |
| Color Temperature | RGBW (multicolor) |
| Control | DMX512 via 3-pin XLR cable |
| Cooling | Active fan |
| Housing Material | Die-cast aluminum |
| Warranty | 2 years |
Frequently Asked Questions - BCC145 BeamZ
How to connect the BCC145 to a DMX controller?
Use a 3-pin XLR cable to connect the device's DMX input to the controller's output. Ensure that the DMX terminator is activated on the last device in the chain.
Can I use the BCC145 in standalone mode without a controller?
Yes, the BCC145 features a built-in automatic mode with predefined color and movement programs. Select this mode via the control panel.
How to adjust the beam angle?
The beam angle is fixed at 25° for this model. For a different angle, use optional filters or lenses.
What to do if the device does not turn on?
Check that the power cable is properly connected and that the mains outlet works. If the problem persists, the internal fuse may have blown: replace it with a fuse of the same rating (indicated on the device).
How to clean the lenses of the BCC145?
Use a soft, lint-free cloth slightly damp (or dry). Avoid abrasive products. Clean regularly to maintain brightness.
What is the maximum allowed suspension weight?
The BCC145 should not be used for direct suspension without proper support. Use a certified safety hook and respect the load limit of 5 kg for the support.
How to set up master/slave mode?
Set one device to Master mode via the menu, then the others to Slave mode. Connect them in a chain with DMX cables. The master will control all slaves.
The fan is very noisy, is this normal?
Fan cooling is active and may generate some noise. Make sure the ventilation openings are not blocked. If the noise becomes excessive, contact a technician.
Can I replace the LED myself?
The LED module is integrated and not user-replaceable. For any intervention, contact an authorized after-sales service.
What cables are supplied with the device?
The BCC145 is supplied with a mains power cable. DMX cables are not included and must be purchased separately.
User questions about BCC145 BeamZ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual BCC145 - BeamZ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BCC145 by BeamZ.
USER MANUAL BCC145 BeamZ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BeamZ
Model : BCC145
Category : Lighting