TI501CA - Uncategorized Vonroc - Free user manual and instructions
Find the device manual for free TI501CA Vonroc in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless power tool |
| Brand | Vonroc |
| Model | TI501CA |
| Power supply | 18 V lithium-ion battery |
| Rated voltage | 18 V |
| Battery capacity | 2.0 Ah |
| Battery type | Lithium-ion |
| No-load speed (1st gear) | 0 - 450 rpm |
| No-load speed (2nd gear) | 0 - 1500 rpm |
| Max torque | 30 Nm |
| Chuck | Keyless, 10 mm |
| Number of speeds | 2 |
| Weight (with battery) | 1.2 kg |
| Dimensions (L x W x H) | 20 x 18 x 6 cm |
| Sound level (LpA) | 75 dB(A) |
| Vibration level (drilling) | 2.5 m/s² |
| Main functions | Drilling and screwdriving |
| Included accessories | Battery, charger, screwdriver bit, carry case |
| Safety | Chuck brake, spindle lock, overload protection |
| Maintenance and cleaning | Clean with a soft damp cloth; do not use solvents |
| Spare parts available | Battery, charger, chuck, carbon brushes |
| Repairability index | 8.2 / 10 |
| Warranty | 2 years |
Frequently Asked Questions - TI501CA Vonroc
How to change the battery of my Vonroc TI501CA?
Press the battery release button at the base of the handle, then pull the battery back. Insert the charged battery by sliding it in until it clicks. Make sure it is locked securely.
How to adjust the rotation speed?
Use the speed selector on top of the tool. Position 1 for low speed (high torque), position 2 for high speed (reduced torque). Make sure the tool is stopped before changing speed.
How to clean the tool?
Disconnect the battery. Clean the exterior with a soft damp cloth. Never use harsh chemicals or solvents. Ventilation slots can be cleaned with a dry brush.
How to use the keyless chuck?
Turn the chuck ring counterclockwise to open the jaws. Insert the bit or drill, then tighten by turning clockwise. Make sure the tool is centered.
What to do if the tool does not start?
Check that the battery is fully charged and correctly inserted. Check that the rotation direction is not in neutral position. If the problem persists, contact Vonroc customer service.
How to store the tool safely?
Remove the battery. Store the tool in a dry, clean place, away from moisture and extreme temperatures. Use the provided carry case to prevent damage.
What is the battery life?
The 2.0 Ah lithium-ion battery provides about 30 minutes of continuous use in medium drilling. Recharge it completely after each use. Avoid full discharges to extend its lifespan.
How to replace the carbon brushes?
Disconnect the battery. Unscrew the carbon brush caps on the sides of the motor. Remove the worn brushes and insert new ones. Screw the caps back on. It is recommended to have this done by a professional if you are not experienced.
What types of drill bits can I use?
Use cylindrical shank bits with a maximum diameter of 10 mm. For wood, steel, and plastic, choose appropriate bits. For masonry, use percussion bits (if the tool has a percussion mode).
How to activate the percussion mode?
If your model has it, turn the mode selection ring to the hammer symbol. This mode is for drilling into brick, concrete, or stone. For wood and metal, use normal drilling mode.
User questions about TI501CA Vonroc
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TI501CA - Vonroc and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TI501CA by Vonroc.
USER MANUAL TI501CA Vonroc
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vonroc
Model : TI501CA
Category : Uncategorized