S2_PT501XX - Uncategorized Vonroc - Free user manual and instructions
Find the device manual for free S2_PT501XX Vonroc in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Sander / polisher |
| Brand | Vonroc |
| Model | S2_PT501XX |
| Dimensions (L x W x H) | Approximately 30 x 15 x 15 cm |
| Weight | Approximately 2.1 kg |
| Power supply | Mains 220-240 V, 50/60 Hz |
| Power consumption | 600 W |
| No-load speed | 3000 - 6000 rpm (variable) |
| Pad diameter | 125 mm |
| Abrasive attachment | Hook and loop (Velcro) |
| Dust extraction port | Yes, 32 mm diameter |
| Sound level | 82 dB(A) (power), 71 dB(A) (pressure) |
| Vibrations | 5.2 m/s² (uncertainty K=1.5 m/s²) |
| Main functions | Sanding, polishing, stripping |
| Variable speed | Yes, adjustment wheel |
| Spindle lock | Yes, for quick pad change |
| Additional handle | Removable side handle |
| Maintenance and cleaning | Clean ventilation slots with a brush; dust off the pad after use |
| Safety | Lock-on switch with anti-restart, anti-restart protection |
| Spare parts and repairability | Pad, abrasives, carbon brushes available via Vonroc after-sales service |
| Protection class | II (double insulation) |
| Warranty | 2 years |
Frequently Asked Questions - S2_PT501XX Vonroc
What type of abrasive should I use with the S2_PT501XX sander?
Use hook and loop (Velcro) abrasive discs with a diameter of 125 mm, with grits suitable for your work (coarse for stripping, fine for polishing).
How do I adjust the speed of the sander?
Turn the adjustment wheel located on top of the device. The speed range is from 3,000 to 6,000 rpm. Use a lower speed for polishing and a higher speed for sanding.
Can I use the sander without dust extraction?
Yes, but it is strongly recommended to connect it to a vacuum cleaner (32 mm diameter) to reduce dust. You can also use a dust bag (not included).
How do I change the sanding pad?
Unplug the device. Press the spindle lock, then unscrew the pad counterclockwise. Screw on the new pad and release the lock.
The sander vibrates abnormally, what should I do?
Check that the pad is properly secured and that the abrasive is well centered. If the vibration persists, the pad may be unbalanced or worn; replace it.
What is the power of the S2_PT501XX sander?
The power consumption is 600 W, which is suitable for sanding and polishing flat and curved surfaces.
How to clean the tool after use?
Unplug the tool. Use a brush or dry cloth to clean the ventilation slots. For the pad, remove the abrasive and dust off with a damp cloth. Never immerse the tool in water.
Is the anti-restart protection active?
Yes, if the tool is unplugged and then reconnected while the switch is in the on position, it will not restart. Set the switch to off and then to on to use it.
Where can I find spare parts such as carbon brushes?
Spare parts (pad, carbon brushes, switch) are available from Vonroc after-sales service or on the official website. Always use original parts.
What is the warranty period for this tool?
The legal warranty is 2 years from the date of purchase. Keep your receipt. The warranty covers manufacturing defects, not normal wear and tear.
User questions about S2_PT501XX Vonroc
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual S2_PT501XX - Vonroc and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. S2_PT501XX by Vonroc.
USER MANUAL S2_PT501XX Vonroc
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vonroc
Model : S2_PT501XX
Category : Uncategorized