VPA 300/200 E - Boiler Nibe - Free user manual and instructions
Find the device manual for free VPA 300/200 E Nibe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hot Water Storage Tank (Boiler) |
| Model | VPA 300/200 E |
| Brand | Nibe |
| Capacity | 300 L (VPA 300) or 200 L (VPA 200) |
| Dimensions (Height x Diameter) | 1800 mm x 600 mm (approx.) |
| Weight (empty) | Approx. 100 kg (VPA 200) / 120 kg (VPA 300) |
| Power Supply | 230V AC, 50 Hz |
| Heating Element Power | 6 kW (typical) |
| Max Operating Pressure | 10 bar |
| Max Operating Temperature | 95 °C |
| Main Functions | Domestic hot water production, backup heating for heat pump systems |
| Insulation | High-efficiency polyurethane foam, 50 mm thickness |
| Maintenance | Annual inspection of anode and safety valve; drain and clean every 2 years |
| Safety Features | Temperature and pressure relief valve, overheat protection, thermostat |
| Spare Parts | Anode rod, heating element, thermostat, safety valve, gaskets |
| Repairability | Modular design; replaceable components; service-friendly |
| Certifications | CE, EN 12897 |
| Warranty | 2 years (standard) |
Frequently Asked Questions - VPA 300/200 E Nibe
What is the difference between VPA 300 and VPA 200?
The VPA 300 has a capacity of 300 liters, while the VPA 200 has 200 liters. Both are part of the same model series and share similar features.
Can the VPA 300/200 E be used with a heat pump?
Yes, it is designed as a backup water heater for heat pump systems, providing domestic hot water when the heat pump cannot meet demand.
How do I perform annual maintenance?
Annual maintenance includes checking the anode rod for corrosion, testing the safety valve, and inspecting electrical connections. Refer to the manual for detailed steps.
What does error code E01 mean?
Error code E01 typically indicates a sensor failure. Check the temperature sensor wiring and replace if necessary. Consult the manual for exact troubleshooting.
How to set the desired water temperature?
Use the control panel (if equipped) to adjust the thermostat. The default setting is usually 60 °C to prevent Legionella growth.
What is the recommended pressure for the expansion vessel?
The pre-charge pressure of the expansion vessel should be set to 3 bar (for a 10 bar system). Adjust according to your system's static pressure.
Can I install the boiler outdoors?
The VPA 300/200 E is designed for indoor installation. Outdoor installation may void the warranty due to weather exposure.
How to drain the boiler?
Turn off power and water supply. Open a hot water tap, then open the drain valve at the bottom. Allow water to flow out completely.
Where can I find spare parts?
Authorized Nibe dealers and online stores stock parts like anode rods, heating elements, and thermostats. Use the part numbers from the manual.
What is the energy efficiency class?
The VPA series typically meets energy efficiency class C or better, depending on the model. Check the product label for exact rating.
User questions about VPA 300/200 E Nibe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boiler in PDF format for free! Find your manual VPA 300/200 E - Nibe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VPA 300/200 E by Nibe.
USER MANUAL VPA 300/200 E Nibe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Nibe
Model : VPA 300/200 E
Category : Boiler