UKV 200 - Boiler Nibe - Free user manual and instructions
Find the device manual for free UKV 200 Nibe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater (Boiler) |
| Model | UKV 200 |
| Brand | Nibe |
| Capacity | 200 liters |
| Power Consumption | 2.7 kW (single-phase) |
| Voltage | 230 V AC, 50 Hz |
| Max Water Temperature | 75 °C |
| Max Operating Pressure | 10 bar |
| Energy Efficiency Class | B |
| Material (Tank) | Enameled steel |
| Insulation | Polyurethane foam, 50 mm |
| Dimensions (H × D) | 1600 mm × 650 mm |
| Weight (empty) | 90 kg |
| Installation | Floor-standing, indoor |
| Included Accessories | Safety valve, thermostat, pressure relief valve |
| Maintenance | Annual inspection, replace magnesium anode every 2-3 years |
| Safety Features | Overheat protection, pressure relief valve, drip tray |
| Spare Parts Available | Heating element, thermostat, anode rod, safety valve |
| Warranty | 2 years (tank), 5 years optional |
| Standards | CE, EN 12897 |
Frequently Asked Questions - UKV 200 Nibe
What is the capacity of the Nibe UKV 200 boiler?
The Nibe UKV 200 has a capacity of 200 liters, suitable for households with 3-4 people.
What are the dimensions of the UKV 200?
The boiler measures 1600 mm in height and 650 mm in diameter, making it a floor-standing model.
How do I install the Nibe UKV 200?
Installation should be done by a qualified professional. The boiler must be placed on a level floor with proper drainage. Connect the cold water inlet, hot water outlet, and electrical supply according to local regulations. Refer to the manual for detailed instructions.
How do I adjust the temperature on the UKV 200?
The thermostat is located behind the front cover. Use a flathead screwdriver to adjust the dial to the desired temperature (max 75 °C). Ensure power is off before opening the cover.
What maintenance does the UKV 200 require?
Annual inspection is recommended. Check the anode rod every 2-3 years and replace if heavily corroded. Flush the tank annually to remove sediment. Also inspect the safety valve for proper operation.
Why is water leaking from the pressure relief valve?
This may indicate excessive pressure in the tank. Check if the valve is stuck or if the water pressure is too high. It could also be due to thermal expansion. If persistent, consult a technician.
How do I replace the heating element?
First, disconnect power and drain the tank. Remove the cover and disconnect wires. Unscrew the old heating element using a socket wrench. Install a new element (same type, e.g., 2.7 kW) and reassemble. Use thread sealant. Finally, refill and test.
Is the UKV 200 energy efficient?
The boiler has an energy efficiency class B, which is standard for electric water heaters. Using proper insulation and setting the thermostat to 60 °C can improve efficiency and reduce heat loss.
What spare parts are available for the UKV 200?
Common spare parts include the heating element, thermostat, safety valve, magnesium anode rod, and drip tray. These can be ordered from Nibe dealers or online retailers.
How long does the warranty last?
The standard warranty is 2 years for the boiler and components. Extended warranty up to 5 years for the tank may be available upon registration. Check your purchase documents.
User questions about UKV 200 Nibe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boiler in PDF format for free! Find your manual UKV 200 - Nibe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UKV 200 by Nibe.
USER MANUAL UKV 200 Nibe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Nibe
Model : UKV 200
Category : Boiler