BA-ST 9075-2FE - Boiler Nibe - Free user manual and instructions
Find the device manual for free BA-ST 9075-2FE Nibe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Boiler (Water Heater) |
| Brand | Nibe |
| Model | BA-ST 9075-2FE |
| Rated Volume | 75 liters |
| Power Supply | 230 V - 50 Hz |
| Heating Power | 2.0 kW |
| Max Operating Pressure | 10 bar |
| Max Temperature | 85 °C |
| Height | 850 mm |
| Diameter | 480 mm |
| Weight (empty) | 25 kg |
| Connection Type | G 1/2" female |
| Material | Enameled steel |
| Insulation | Polyurethane foam |
| Energy Efficiency Class | C |
| Standby Consumption | 1.2 kWh/24h |
| Heating Element | Electric immersion heater |
| Safety Features | Thermostat, pressure relief valve, overheat protection |
| Maintenance | Annual inspection, replace anode rod every 2 years |
| Installation | Wall-mounted (horizontal or vertical) |
Frequently Asked Questions - BA-ST 9075-2FE Nibe
What is the capacity of the Nibe BA-ST 9075-2FE boiler?
The boiler has a rated capacity of 75 liters.
How do I adjust the temperature on this boiler?
Use the thermostat dial located on the front panel. Turn clockwise to increase temperature, counterclockwise to decrease. Maximum temperature is 85 °C.
Does the Nibe BA-ST 9075-2FE require a pressure relief valve?
Yes, it is equipped with a safety pressure relief valve. Ensure it is properly installed and tested annually.
How do I install the boiler?
The boiler can be wall-mounted vertically or horizontally. Ensure the wall can support the weight (approx. 25 kg empty) and follow the installation guide for plumbing and electrical connections.
What maintenance does the Nibe BA-ST 9075-2FE need?
Annual inspection of the anode rod is recommended. Replace the magnesium anode every 2 years to prevent corrosion. Drain and flush the tank if sediment builds up.
Is the Nibe BA-ST 9075-2FE energy efficient?
It has an energy efficiency class C. Standby consumption is about 1.2 kWh per day.
What is the maximum working pressure?
The maximum operating pressure is 10 bar (145 psi). Ensure your water pressure does not exceed this.
Can I connect the boiler to a solar heating system?
This model is not specifically designed for solar connection. Consult a professional for alternative solutions.
What does the error code E02 mean?
Error code E02 typically indicates a temperature sensor failure. Check the sensor connection and replace if necessary.
Where can I find replacement parts?
Replacement parts are available from Nibe authorized dealers. Common parts include anode rods, heating elements, and thermostats.
User questions about BA-ST 9075-2FE Nibe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boiler in PDF format for free! Find your manual BA-ST 9075-2FE - Nibe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BA-ST 9075-2FE by Nibe.