SIRAX BT7000 - Electrical Transformer Camille Bauer - Free user manual and instructions
Find the device manual for free SIRAX BT7000 Camille Bauer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power and Energy Analyzer |
| Brand | Camille Bauer |
| Model | SIRAX BT7000 |
| Dimensions | 96 x 96 mm (panel cutout: 92 x 92 mm) |
| Weight | Approx. 0.5 kg |
| Supply Voltage | 100-240 V AC/DC, 50/60 Hz |
| Display | Backlit LCD, 4 lines |
| Measuring Functions | Voltage (L-L, L-N), Current, Frequency, Active Power, Reactive Power, Apparent Power, Power Factor, Active Energy, Reactive Energy, Apparent Energy |
| Accuracy | Class 0.5 for energy (IEC 62053-21) |
| Communication | Modbus RTU (RS485), optional Ethernet or Pulse output |
| Input Ratings | Voltage: 100-500 V L-N, Current: 1 A or 5 A via CT |
| Harmonics Measurement | Up to 31st harmonic (optional) |
| Overload Capability | 1.2 x rated continuously, 2 x for 1 second |
| Environmental Conditions | Operating temperature -10 to +55 °C, humidity ≤95% RH |
| Enclosure | Panel mount, IP54 front face |
| Power Consumption | < 5 VA |
| Maintenance | No routine maintenance required; clean with dry cloth |
| Safety Standards | IEC 61010-1, CAT III |
| Spare Parts / Repairability | No user-serviceable parts; contact manufacturer for repair |
Frequently Asked Questions - SIRAX BT7000 Camille Bauer
How do I install the SIRAX BT7000?
Mount the device in a panel cutout of 92x92 mm. Connect voltage and current inputs according to the wiring diagram in the manual. Ensure proper CT polarity and voltage phase sequence.
What is the communication protocol supported?
The SIRAX BT7000 supports Modbus RTU over RS485. Optional Ethernet or pulse output modules can be added.
How do I reset the energy counters?
Press and hold the Reset button for 3 seconds or use the Modbus command to clear energy registers. Refer to the manual for exact procedure.
What is the accuracy class of this meter?
The device has an accuracy class 0.5 for active energy according to IEC 62053-21.
Can I use the SIRAX BT7000 for harmonic analysis?
Yes, with the optional harmonic measurement feature, it can analyze harmonics up to the 31st order.
What is the power supply requirement?
The device accepts a universal supply of 100-240 V AC/DC, 50/60 Hz.
How do I configure the CT ratio?
Enter the setup menu via the front panel buttons or Modbus. Set the primary and secondary CT values (e.g., 1000/5 A).
Does the device have a backlit display?
Yes, it has a backlit LCD that displays 4 lines of data.
What are the dimensions for panel cutout?
The required panel cutout is 92 x 92 mm.
Where can I find the full user manual?
The user manual is available for free download on notice-facile.com in PDF format.
User questions about SIRAX BT7000 Camille Bauer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electrical Transformer in PDF format for free! Find your manual SIRAX BT7000 - Camille Bauer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SIRAX BT7000 by Camille Bauer.
USER MANUAL SIRAX BT7000 Camille Bauer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Camille Bauer
Model : SIRAX BT7000
Category : Electrical Transformer