HNT62340B - Basket BEKO - Free user manual and instructions
Find the device manual for free HNT62340B BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cooker Hood |
| Model | HNT62340B |
| Brand | Beko |
| Dimensions (W x D x H) | 60 cm x 50 cm x 30 cm |
| Weight | 8 kg |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 200 W |
| Maximum Extraction Rate | 600 m³/h |
| Noise Level (max) | 65 dB |
| Number of Speeds | 3 |
| Lighting | 2 x 40 W halogen bulbs |
| Filter Type | Aluminum grease filter (washable) |
| Optional Filter | Activated carbon filter for recirculation |
| Installation Type | Chimney hood (ducted or recirculation) |
| Duct Diameter | 150 mm |
| Control Type | Push buttons |
| Energy Class | A |
| Maintenance | Clean grease filter every month |
| Safety Features | Internal thermal cut-out |
| Warranty | 2 years |
Frequently Asked Questions - HNT62340B BEKO
How to install the Beko HNT62340B hood?
Refer to the manual for detailed installation steps. Ensure the hood is securely mounted to the wall, with proper ducting for external venting or recirculation. Check electrical connections before powering on.
How to clean the grease filter?
The aluminum grease filter is removable. Clean it monthly with warm soapy water or in a dishwasher at low temperature. Dry thoroughly before reinserting. Do not use abrasive cleaners.
How to replace the activated carbon filter?
If using recirculation mode, replace the carbon filter every 3-6 months. Remove the grease filter first, then slide out the old carbon filter and insert a new one. Ensure the filter is properly seated.
What are the dimensions of the hood?
The dimensions are approximately 60 cm (width) x 50 cm (depth) x 30 cm (height). Verify the actual measurements before installation.
Why is my hood noisy?
Noise can be due to loose ducting, vibration, or motor issues. Ensure the hood is properly installed and the ductwork is secure. Check for obstructions in the fan or filters.
How to change the light bulb?
Disconnect power, then access the lamp housing. Remove the old halogen bulb (40W max) and replace with a new one of the same type. Use gloves to avoid touching the bulb directly.
Does the hood come with a remote control?
No, this model is controlled via push buttons on the front panel. No remote control is included.
What does the error code mean?
Error codes (if any) indicate specific malfunctions. Refer to the manual for a list of codes. Common issues include sensor faults or motor overload. Contact Beko support for assistance.
What is the warranty period?
Beko offers a standard 2-year warranty for this hood. Registration may be required for full coverage.
Can I use the hood without ducting?
Yes, the hood can be used in recirculation mode with an activated carbon filter. The filter is not included and must be purchased separately.
User questions about HNT62340B BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual HNT62340B - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HNT62340B by BEKO.