C303TS - Grass trimmer Shindaiwa - Free user manual and instructions
Find the device manual for free C303TS Shindaiwa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Grass trimmer |
| Brand | Shindaiwa |
| Model | C303TS |
| Total length | 180 cm |
| Cutting width | 40 cm |
| Weight | 5,5 kg |
| Engine type | 2-stroke |
| Displacement | 30 cm³ |
| Power | 1,2 kW |
| Tank capacity | 0,7 L |
| Fuel type | Gasoline-oil mixture 50:1 |
| Ignition system | Electronic CDI |
| Starting | Recoil starter |
| Carburetor type | Diaphragm |
| Air filter | Sponge |
| Spark plug | NGK BPMR7A |
| Clutch | Centrifugal |
| Transmission | Flexible |
| Cutting head | Tap-and-go |
| Line diameter | 2,4 mm |
| Brush blade | Included |
| Sound level | 95 dB(A) |
| Vibration | 5,5 m/s² |
| Warranty | 2 years |
Frequently Asked Questions - C303TS Shindaiwa
How to start the Shindaiwa C303TS grass trimmer?
Make sure the tank contains the gasoline-oil mixture 50:1. Activate the emergency stop, close the choke, give a few pulls of the starter without ignition, then open the choke and pull firmly. Consult the manual for more details.
What fuel mixture to use?
Use a mixture of unleaded 95 gasoline and synthetic 2-stroke engine oil at a ratio of 50:1 (2% oil). Do not use gasoline containing more than 10% ethanol.
How to change the cutting head?
Place the guard on the blade, insert a pin into the hole of the head, unscrew the screw clockwise (reverse thread), replace the head, then screw it back on. Tighten firmly.
What to do if the engine does not start?
Check the spark plug (clean, correct gap), the air filter (clean), the fuel (fresh mixture), and that the emergency stop is in the 'run' position. If necessary, purge the carburetor.
How to maintain the air filter?
Unscrew the cover, remove the sponge filter, wash it with soapy water, dry it, soak it in engine oil (not lubrication oil), squeeze out the excess, and reassemble.
What accessories are compatible with the C303TS?
The grass trimmer accepts line heads of different diameters (2.4 mm recommended) and Shindaiwa-specific 3-tooth or 4-tooth brush blades. Check the shaft diameter.
How to adjust the carburetor?
Adjustments are made with the L (idle) and H (full throttle) screws. First turn the L screw to obtain a stable idle, then the H screw for full power. Do this while the engine is hot and with a clean air filter.
What safety precautions to take?
Wear gloves, safety goggles, closed shoes, and long pants. Keep people and animals away. Always use the blade guard. Stop the engine before any adjustment.
How to store the unit off-season?
Empty the tank and run the engine until it stops to purge the carburetor. Clean the air filter and spark plug. Store in a dry, frost-free place.
Where to find spare parts for the C303TS?
Contact an authorized Shindaiwa dealer or order online using the references indicated in the manual. Availability of filters, spark plugs, cutting heads, blades, and repair kits.
User questions about C303TS Shindaiwa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grass trimmer in PDF format for free! Find your manual C303TS - Shindaiwa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C303TS by Shindaiwa.
USER MANUAL C303TS Shindaiwa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Shindaiwa
Model : C303TS
Category : Grass trimmer