C360T - Grass trimmer Shindaiwa - Free user manual and instructions
Find the device manual for free C360T Shindaiwa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Grass trimmer (brush cutter) |
| Brand | Shindaiwa |
| Model | C360T |
| Engine type | 2-stroke, air-cooled |
| Displacement | 24,5 cm³ |
| Power | 0,9 kW (1.2 hp) |
| Idle speed | 2700 rpm |
| Max speed | 10500 rpm |
| Fuel tank capacity | 0,6 L |
| Fuel mixture | Unleaded gasoline + 2-stroke oil (50:1) |
| Ignition type | Electronic (CDI) |
| Cutting diameter | 40 cm (with nylon line) |
| Head type | Nylon line head and brush cutter blade |
| Shaft type | Straight, rigid |
| Overall length | 180 cm |
| Weight (without accessories) | 5,8 kg |
| Handlebar type | U-handlebar with anti-vibration grips |
| Safety | Blade guard, emergency stop, safety trigger |
| Routine maintenance | Clean air filter, spark plug, sharpen blade |
| Sound level | 96 dB(A) (guaranteed) |
| Vibrations | 8,5 m/s² (left handle), 7,2 m/s² (right) |
| Spare parts available | Yes, through Shindaiwa network |
| Manual pages | 164 pages |
Frequently Asked Questions - C360T Shindaiwa
What is the fuel mixture for the Shindaiwa C360T?
Use a mixture of unleaded gasoline and quality 2-stroke oil in a ratio of 50:1 (i.e., 20 ml of oil per 1 liter of gasoline).
How to start the C360T grass trimmer?
1. Activate the choke (choke lever). 2. Pump the primer bulb until fuel is visible. 3. Pull the starter rope until resistance is felt, then pull firmly. 4. Once started, gradually close the choke.
What type of nylon line to use?
Use a nylon line of 2.0 mm to 2.4 mm in diameter, suitable for brush cutters. The C360T is equipped with a quick-load head.
How to maintain the air filter?
Clean the air filter every 10 hours of use. Remove it, tap it to remove dust, wash it with soapy water if necessary, dry it, and re-oil it with air filter oil before reinstalling.
What are the important safety precautions?
Always wear safety glasses, gloves, hearing protection, and safety shoes. Never use the tool without the blade guard. Keep people and animals at least 15 meters away.
How to adjust the carburetor?
Carburetor adjustment should be done by a professional. The idle screw allows adjusting the idle speed (approximately 2700 rpm). The jet screws (H and L) are preset at the factory.
Why does not the cutting head rotate?
First check if the brake is released. If the problem persists, inspect the belt or clutch. A worn clutch may require replacement. Consult the manual for tests.
Which blade can I use on the C360T?
The C360T accepts brush cutter blades of 260 mm diameter (bore 25.4 mm). Use blades suitable for vegetation: 4-tooth blade for brambles, grass blade for dense grass.
How to store the tool in winter?
Empty the fuel tank and run the engine until it stops. Clean the tool. Apply a thin layer of oil into the cylinder through the spark plug hole. Store it in a dry and frost-free place.
Where can I find spare parts?
Spare parts are available at authorized Shindaiwa dealers or on specialized websites. Use your tool's serial number to order the correct parts (e.g., spark plug, filter, belt).
User questions about C360T Shindaiwa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grass trimmer in PDF format for free! Find your manual C360T - Shindaiwa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C360T by Shindaiwa.
USER MANUAL C360T Shindaiwa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Shindaiwa
Model : C360T
Category : Grass trimmer