FTCO 60 XS - Basket FRANKE - Free user manual and instructions
Find the device manual for free FTCO 60 XS FRANKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Extractor hood |
| Brand | Franke |
| Model | FTCO 60 XS |
| Width | 60 cm |
| Depth | 50 cm |
| Height (hood only) | 15 cm |
| Chimney height | 65 to 110 cm |
| Net weight | 15 kg |
| Power supply | 220-240 V, 50 Hz |
| Maximum power | 250 W |
| Energy class | A+ |
| Maximum airflow | 600 m³/h |
| Maximum noise level | 65 dB(A) |
| Number of speeds | 3 |
| Lighting | LED, 2 x 3 W |
| Control type | Mechanical sliders |
| Grease filter | Aluminium, dishwasher safe |
| Charcoal filter | Optional, replace every 6 months |
| Extraction mode | Extraction or recirculation |
| Outlet diameter | 150 mm |
| Filter maintenance | Monthly cleaning of grease filters |
| Safety | Automatic shut-off in case of overheating |
| Warranty | 2 years |
| Spare parts available | Grease filters, charcoal filters, LED bulbs |
| Repairability | Repairability index 8/10 |
Frequently Asked Questions - FTCO 60 XS FRANKE
How to install the FTCO 60 XS hood?
Installation should be carried out by a professional. Fix the hood to the wall respecting safety distances: at least 65 cm above an electric cooktop, 75 cm for gas. Use the supplied plugs. Connect the air outlet to an exhaust duct or install the charcoal filter for recirculation mode.
How to clean the grease filters?
The aluminium grease filters can be cleaned in the dishwasher at low temperature or by hand with warm soapy water. Let them dry completely before reinstalling. Perform this operation at least once a month.
When should the charcoal filter be replaced?
The charcoal filter is not washable. It should be replaced approximately every 6 months, or more often if the hood is used intensively. A saturation indicator may be present on some models.
How to change the LED bulb?
Unclip the diffuser by pressing on the sides. Disconnect the connector of the defective bulb and connect the new one. Replace the diffuser. Use only G4 3W LED bulbs recommended by Franke.
The hood is making noise, is this normal?
A noise level up to 65 dB at maximum speed is normal. If the noise is abnormal (squeaking, vibrations), check that the hood is securely fixed and that the filters are clean. A clogged filter can increase noise.
Can the hood be used in recirculation mode without a duct?
Yes, recirculation mode is possible by installing a charcoal filter (not supplied). The air is filtered then returned to the room. Make sure the room is well ventilated.
How to adjust the suction speed?
Use the mechanical sliders located on the front. Positions: 0 (off), 1 (low speed), 2 (medium speed), 3 (high speed). Adjust the speed according to the cooking.
Why is the hood not working?
Check the power supply: fuse or circuit breaker. Make sure the plug is connected. If the hood is in standby mode, press the button. If nothing happens, contact after-sales service.
What is the ideal height between the hood and the cooktop?
For electric cooking: at least 65 cm. For gas cooking: at least 75 cm. Respect these distances for optimal smoke extraction and to avoid any risk of burns.
Where to find spare parts for the FTCO 60 XS?
Spare parts (filters, bulbs) are available from Franke authorized dealers or on the official website. Use the model reference to order. The legal warranty of conformity applies.
User questions about FTCO 60 XS FRANKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual FTCO 60 XS - FRANKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FTCO 60 XS by FRANKE.