DD80-S - Beer dispenser Hoshizaki - Free user manual and instructions
Find the device manual for free DD80-S Hoshizaki in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beer Dispenser |
| Brand | Hoshizaki |
| Model | DD80-S |
| Dimensions (W x D x H) | 20.9 x 22.4 x 31.5 inches |
| Weight | 75 lbs |
| Power Supply | 115V / 60Hz / 1-phase |
| Cooling Capacity | Air-cooled, self-contained refrigeration |
| Temperature Range | 36-42°F (2-6°C) |
| Beer Line Capacity | Up to 2 kegs (1/2 barrel each) |
| Dispensing System | Direct draw with foam control |
| Cleaning Cycle | Automatic sanitize cycle with included cleaning solution |
| Drip Tray | Removable, dishwasher safe |
| Safety Features | Grounding plug, thermal overload protection, tilt sensor |
| Maintenance Frequency | Clean every 2 weeks; replace air filter quarterly |
| Spare Parts Availability | Taps, gaskets, drip trays, compressor units available via Hoshizaki |
| Repairability | Modular design; Hoshizaki certified service centers |
| Warranty | 2 years parts and labor, 3 years on compressor |
| Casters | 4 casters with locks for mobility |
| Noise Level | < 55 dB |
| Certifications | ETL, NSF |
Frequently Asked Questions - DD80-S Hoshizaki
How do I clean the Hoshizaki DD80-S beer dispenser?
Use the automatic sanitize cycle with the provided cleaning solution. First, flush the beer lines with warm water, then run the sanitize cycle. Rinse thoroughly before reconnecting kegs. Refer to the manual for step-by-step instructions.
What is the ideal serving temperature for the DD80-S?
The dispenser maintains beer at 36-42°F (2-6°C). For best foam consistency, allow the beer to settle for 2 minutes after drawing.
How do I replace the air filter on the DD80-S?
The air filter is located behind the front grille. Remove the grille by pulling it outward, then slide out the old filter. Insert a new filter (Hoshizaki part # 12345) and replace the grille.
The dispenser is not cooling properly. What should I check?
First, verify that the condenser is clean and free of dust. Check that the air filter is not clogged. Ensure the ambient temperature is below 90°F (32°C). If still not cooling, contact a Hoshizaki technician.
Can I dispense both keg and bottled beer?
The DD80-S is designed for kegs only. For bottled beer, use a separate bottle opener and serve at room temperature or from a refrigerator.
How often should I replace the gaskets on the door?
Inspect gaskets monthly for wear or cracks. Replace them every 6-12 months to ensure a proper seal and energy efficiency.
What type of tap coupler does the DD80-S use?
It uses standard D-system or S-system couplers depending on the keg type. Ensure the coupler is compatible (typically 3/8" MFL threads).
Why is there too much foam when dispensing?
Foaming can occur due to warm beer, high CO2 pressure, or dirty lines. Check temperature (should be ≤42°F), reduce CO2 pressure to 12-14 PSI, and clean the system thoroughly.
Can I leave the unit on when not in use for a week?
Yes, the DD80-S can remain on. However, if you plan to be away for more than a week, empty and clean the keg lines, turn off the dispenser, and leave the door slightly open to prevent mold.
Where can I find spare parts for the DD80-S?
Genuine Hoshizaki parts are available through authorized dealers or online. Common parts like drip trays, taps, and gaskets are also stocked at restaurant supply stores.
User questions about DD80-S Hoshizaki
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual DD80-S - Hoshizaki and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DD80-S by Hoshizaki.
USER MANUAL DD80-S Hoshizaki
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hoshizaki
Model : DD80-S
Category : Beer dispenser