DD95 - Beer dispenser Hoshizaki - Free user manual and instructions
Find the device manual for free DD95 Hoshizaki in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beer Dispenser |
| Brand | Hoshizaki |
| Model | DD95 |
| Dimensions (HxWxD) | 500 x 400 x 300 mm |
| Net Weight | 15 kg |
| Power Supply | 220-240 V, 50/60 Hz, 0.5 kW |
| Cooling Capacity | Up to 10 liters of beer |
| Serving Temperature Range | 2-4°C |
| Refrigerant Type | R134a |
| Noise Level | < 55 dB |
| Main Functions | Beer dispensing, temperature control, foam reduction |
| Construction Material | Stainless steel body, ABS drip tray |
| Installation | Free-standing, countertop |
| Cleaning and Maintenance | Daily line flushing, weekly sanitation cycle |
| Safety Features | Overheat protection, safety thermostat, drip tray sensor |
| Spare Parts Availability | Tap handles, drip trays, cooling fans, thermostats |
| Repairability | Modular components, replaceable cooling system |
| Warranty | 2 years parts and labor |
| Certifications | CE, ETL, NSF |
Frequently Asked Questions - DD95 Hoshizaki
How do I clean the Hoshizaki DD95 beer dispenser lines?
Disconnect the keg, flush the lines with warm water and a line cleaning solution (sodium percarbonate recommended), then rinse thoroughly. Repeat weekly.
What is the ideal serving temperature for beer with the DD95?
Set the thermostat to 2-4°C (35-39°F) for optimal carbonation and taste. Adjust based on beer style.
Can I use the DD95 for cider or soft drinks?
Yes, the dispenser works with any carbonated beverage in a keg. Ensure the keg coupler is compatible with the gas and liquid connections.
Why is my beer foaming excessively?
Check that the temperature is correct (too warm causes foam). Also ensure the CO2 pressure is set between 10-12 psi and the lines are clean.
How do I replace the drip tray on the DD95?
The drip tray lifts off when pulled upward. Clean it and snap back into place. Replacement parts are available from Hoshizaki dealers.
What is the power consumption of the DD95?
The unit consumes 0.5 kWh under normal operation. It uses a compressor that cycles on and off, so actual usage varies.
How often should I descale the cooling system?
Descaling is not typically required for beer dispensers. However, if you notice reduced cooling, use a commercial descaler on the condenser fins annually.
Can I install the DD95 under a counter?
Yes, but ensure adequate ventilation (at least 10 cm clearance on sides and back) to prevent overheating. The front grille must remain unobstructed.
What type of keg coupler does the DD95 use?
It accepts a standard D coupler (also called Sanke or Sankey) for commercial kegs. Adapters are available for other styles.
How do I reset the thermostat if it stops cooling?
Unplug the unit for 5 minutes, then plug back in. If the compressor doesn't start, check the overheat protection switch under the front panel; press the reset button if tripped.
User questions about DD95 Hoshizaki
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual DD95 - Hoshizaki and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DD95 by Hoshizaki.
USER MANUAL DD95 Hoshizaki
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hoshizaki
Model : DD95
Category : Beer dispenser