HDD-2-59 - Beer dispenser Hoshizaki - Free user manual and instructions
Find the device manual for free HDD-2-59 Hoshizaki in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beer Dispenser (Draft Beer Dispenser) |
| Model | Hoshizaki HDD-2-59 |
| Number of Taps | 2 |
| Cooling System | Forced-air cooling with hermetic compressor |
| Temperature Range | 2°C to 6°C (35°F to 43°F) |
| Dimensions (W x D x H) | 600 mm x 600 mm x 800 mm |
| Weight (Net) | 55 kg |
| Power Supply | 220-240 V, 50 Hz, 1 phase |
| Power Consumption | 500 W |
| Refrigerant | R404A, 300 g |
| Main Functions | Cooling, carbonation control, dispensing via beer taps |
| Material | Stainless steel exterior, ABS interior |
| Installation Type | Freestanding or countertop |
| Cleaning | Daily cleaning of drip tray and beer lines; periodic deep cleaning |
| Safety Features | Grounding required, thermal overload protection, removable drip tray |
| Spare Parts Available | Taps, hoses, CO2 regulator, gaskets, cooling fan |
| Reparability | Modular design; serviceable by certified technician |
| Warranty | 2 years for parts and labor |
Frequently Asked Questions - HDD-2-59 Hoshizaki
How do I clean the beer lines on the Hoshizaki HDD-2-59?
Use a line cleaning solution recommended for beer dispensers. Disconnect the keg, flush the lines with warm water, then circulate the cleaning solution for 15 minutes, and rinse thoroughly with fresh water.
What is the ideal temperature setting for beer dispensing?
The ideal temperature is between 2°C and 6°C (35°F to 43°F) to maintain beer quality and proper foam.
Can I use the dispenser for other beverages besides beer?
Yes, it can dispense carbonated soft drinks, cider, or wine, but you must thoroughly clean the system between beverage changes.
How do I adjust the carbonation level?
Use the CO2 pressure regulator on the back of the unit. Increase pressure for higher carbonation, but stay within 10-14 PSI typical range for most beers.
Why is the beer foaming excessively?
Check if the beer is too warm (above 6°C), CO2 pressure too high, lines are dirty, or glass is not clean. Ensure the tap is fully opened and not partially closed.
How often should I clean the drip tray?
Clean the drip tray daily with warm soapy water to prevent bacterial growth and odors. Rinse and dry before reattaching.
What type of CO2 system does this dispenser use?
It uses a standard CO2 cylinder with a regulator. You can connect either an external tank (via a hose) or use an internal mount (check model specifics).
The cooling fan is noisy – what should I do?
First, clean the fan blades and condenser coils. If noise persists, the fan motor may need replacement. Contact a service technician.
Can I install the dispenser outdoors?
This model is designed for indoor use only. Avoid exposure to rain, direct sunlight, or extreme temperatures.
Where can I find replacement parts for the HDD-2-59?
Contact an authorized Hoshizaki dealer or visit their official parts website. Common parts like taps and hoses are widely available.
User questions about HDD-2-59 Hoshizaki
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual HDD-2-59 - Hoshizaki and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDD-2-59 by Hoshizaki.
USER MANUAL HDD-2-59 Hoshizaki
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hoshizaki
Model : HDD-2-59
Category : Beer dispenser