DD59-S - Beer dispenser Hoshizaki - Free user manual and instructions
Find the device manual for free DD59-S Hoshizaki in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beer Dispenser |
| Brand | Hoshizaki |
| Model | DD59-S |
| Dimensions (W x D x H) | 305 x 305 x 420 mm |
| Weight | 15 kg |
| Power Supply | 220-240 V, 50/60 Hz |
| Power Consumption | 200 W |
| Cooling System | Compressor (forced air) |
| Beer Capacity | 5 L (standard keg) |
| Dispensing | Manual faucet with flow control |
| Temperature Range | 2-8 °C |
| Cleaning | Removable drip tray and faucet |
| Safety | Thermal fuse, overheat protection |
| Materials | Stainless steel body, plastic interior |
| Installation | Free-standing on countertop |
| Noise Level | < 50 dB(A) |
| Warranty | 2 years (parts and labor) |
| Energy Efficiency | Class A |
| Maintenance | Daily cleaning of faucet and lines |
| Spare Parts Availability | Faucets, seals, cooling units |
Frequently Asked Questions - DD59-S Hoshizaki
How do I install the Hoshizaki DD59-S beer dispenser?
Place the dispenser on a stable, level countertop near a power outlet. Ensure there is adequate ventilation around the unit. Connect the keg according to the manual: attach the gas line and beer line, then open the CO2 valve. Allow 2-3 hours for the beer to cool before serving.
What temperature should I set the dispenser to?
The recommended temperature for serving beer is between 2-8 °C (36-46 °F). Adjust the thermostat dial inside the cooling compartment to achieve the desired temperature. Use a thermometer to verify.
How often should I clean the beer dispenser?
Clean the faucet and drip tray daily with warm water and mild detergent. Every 2 weeks, sanitize the beer lines with a cleaning solution and flush with water. Refer to the manual for the full cleaning procedure.
Why is my beer not cold enough?
Check that the dispenser is plugged in and the compressor is running. Ensure the temperature setting is correct (2-8 °C). If the unit is overfilled or the door is left open, cooling efficiency may decrease. Allow time for the beer to cool after placing a new keg.
How do I replace the CO2 cylinder?
Turn off the gas valve, disconnect the old cylinder, and connect the new one. Tighten the connection and gradually open the valve. Check for leaks using soapy water. Ensure the pressure is set within the range specified in the manual (usually 10-15 psi).
What should I do if the faucet is dripping?
The faucet may need cleaning or the seal may be worn. Remove the faucet and clean it with warm water. If dripping persists, replace the faucet seals (available as spare parts). Tighten the faucet connection if loose.
Can I use this dispenser for other beverages?
The DD59-S is designed for beer but can be used with other carbonated beverages if compatible. Avoid sugary drinks as they may clog the lines. Clean thoroughly between different beverages.
How do I change the keg?
First, turn off the gas valve and release pressure. Disconnect the beer line and gas line from the empty keg. Remove the keg and insert the new one. Reconnect the lines and open the gas valve. Pour a few ounces to clear any air from the line.
What does the error code E1 mean?
Error code E1 indicates a temperature sensor fault. Check the sensor connection and ensure the cooling compartment is not blocked. If the issue persists, contact Hoshizaki service for replacement.
Where can I find spare parts for the DD59-S?
Hoshizaki authorized dealers and online platforms carry spare parts such as faucets, seals, and cooling elements. Use the model number DD59-S when ordering. Refer to the parts list in the manual.
User questions about DD59-S Hoshizaki
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual DD59-S - Hoshizaki and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DD59-S by Hoshizaki.
USER MANUAL DD59-S Hoshizaki
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hoshizaki
Model : DD59-S
Category : Beer dispenser