H13 - Jack T-Rex - Free user manual and instructions
Find the device manual for free H13 T-Rex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hydraulic Floor Jack |
| Brand | T-Rex |
| Model | H13 |
| Lifting Capacity | 2 tons (4400 lbs) |
| Minimum Height | 135 mm |
| Maximum Height | 390 mm |
| Chassis Length | 550 mm |
| Chassis Width | 350 mm |
| Weight | 15 kg |
| Material | Heavy-duty steel |
| Power Source | Manual hydraulic pump |
| Handle Type | Two-piece steel handle |
| Safety Valve | Overload protection valve |
| Front Wheels | 2 casters (swivel) |
| Rear Wheels | 2 fixed wheels |
| Lifting Range | 135-390 mm |
| Usable with | Passenger cars, light SUVs |
| Oil Capacity | Pre-filled hydraulic oil |
| Maintenance | Periodic lubrication of linkage |
| Storage | Keep dry and clean |
| Warranty | 1 year limited |
Frequently Asked Questions - H13 T-Rex
What is the maximum lifting capacity of the T-Rex H13 jack?
The T-Rex H13 has a lifting capacity of 2 tons (4400 lbs), suitable for most passenger cars and light SUVs.
What is the minimum and maximum height of this jack?
The minimum height (saddle down) is 135 mm and the maximum height (saddle fully raised) is 390 mm.
How do I bleed air from the hydraulic system?
With the jack fully lowered, remove the oil filler plug. Pump the handle several times to release trapped air, then replace the plug.
What type of oil should I use for the T-Rex H13?
Use hydraulic jack oil (ISO 32 grade). Do not use brake fluid or motor oil.
How should I store the jack after use?
Store the jack in a dry, clean environment with the saddle fully lowered to prevent rust and maintain seal integrity.
What does the overload protection valve do?
The safety overload valve prevents lifting beyond the rated capacity, protecting the jack and user from overloading.
Can I use this jack for trucks or heavy SUVs?
No, the 2-ton capacity is not sufficient for heavy trucks or large SUVs. Overloading may cause failure.
How often should I lubricate the moving parts?
Lubricate pivot points and wheels with light machine oil every 3 months or after heavy use.
Why won't the jack lift the vehicle fully?
Possible causes: low hydraulic oil, air in the system, or relief valve not closed. Check oil level and bleed air.
Is the jack safe to use on sloped surfaces?
No, always use the jack on a level, hard surface. Chock the wheels and engage the vehicle's parking brake.
User questions about H13 T-Rex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Jack in PDF format for free! Find your manual H13 - T-Rex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H13 by T-Rex.
USER MANUAL H13 T-Rex
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : T-Rex
Model : H13
Category : Jack