EGO CS2000E - Saw

CS2000E - Saw EGO - Free user manual and instructions

Find the device manual for free CS2000E EGO in PDF.

📄 296 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice EGO CS2000E - page 7
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Cordless chain saw
Brand EGO
Model CS2000E
Power source 56 V lithium-ion battery (not included)
Guide bar length 40 cm (16 inches)
Chain pitch 3/8 inch
Weight 5.4 kg (without battery)
Dimensions (L × W × H) 95 × 28 × 28 cm
Usage Wood cutting, pruning, felling small trees
Lubrication system Automatic with oil reservoir
Chain brake Integrated for safety
Trigger Double safety (two hands)
Maintenance Regular cleaning, sharpening and chain tensioning
Spare parts Chain, guide bar, battery, charger available
Repairability Repairability score: 6.9 / 10
Sound level 99 dB(A) (measured value)

Frequently Asked Questions - CS2000E EGO

What is the battery voltage for the CS2000E?
The CS2000E saw operates with a 56 V battery from the EGO Power+ range. The battery is not included in the packaging.
What oil should I use for chain lubrication?
Use a special chainsaw chain oil, preferably biodegradable. Do not use used engine oil.
How to tension the chain of the CS2000E?
Loosen the guide bar fixing nut, turn the tensioning screw (located on the side) clockwise to tighten, then retighten the nut. The chain should be able to be lifted 3 to 4 mm at the middle of the guide bar.
The saw does not start, what should I do?
Check that the battery is properly inserted and charged. Make sure the chain brake is not engaged (pull the hand guard back). If the problem persists, consult the manual.
What is the battery charging time?
With a standard EGO charger, the charging time is approximately 60 to 90 minutes for a 2.5 Ah battery. Larger batteries require more time.
Can I use the CS2000E in rainy weather?
No, the saw is not designed for use in rain or wet conditions. Risk of electric shock and tool damage.
How to sharpen the chainsaw chain?
Use a round file with a diameter of 4.8 mm (3/16 inch) to sharpen each tooth. Always file from the inside outward, following a 30° angle. It is recommended to seek professional help.
What is the sound level of the CS2000E?
The sound pressure level is 99 dB(A) (measured value). Always wear hearing protection when using.
How to clean the guide bar?
After each use, remove the guide bar and clean the guide bar groove with a suitable tool to remove sawdust and oil residues. Also check the sprocket wear.
Where to find spare parts for the CS2000E?
Spare parts (chain, guide bar, battery, charger) are available from authorized EGO dealers and specialized online sales sites.

User questions about CS2000E EGO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Saw in PDF format for free! Find your manual CS2000E - EGO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CS2000E by EGO.

USER MANUAL CS2000E EGO

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : EGO

Model : CS2000E

Category : Saw