PS1000E - Saw EGO - Free user manual and instructions
Find the device manual for free PS1000E EGO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Saw |
| Brand | EGO |
| Model | PS1000E |
| Power Source | 56V lithium-ion battery |
| Dimensions (L x W x H) | Approximately 45 x 25 x 20 cm |
| Weight | Approximately 4.5 kg (with battery) |
| No-load speed | 3000 rpm |
| Max. cutting depth | 60 mm |
| Cutting angle | 0° to 45° |
| Blade diameter | 190 mm |
| Blade arbor | 20 mm |
| Battery type | 56V Li-ion, interchangeable with EGO range |
| Charging time | Approximately 60 min (fast charger) |
| Runtime | Approximately 30 min (depending on use) |
| Sound level | 85 dB(A) |
| Vibration | 2.5 m/s² |
| Main functions | Straight and angled cuts, laser guide, dust ejection |
| Maintenance and cleaning | Clean the blade after use, lubricate moving parts |
| Safety | Blade brake, anti-theft switch, two-hand trigger |
| Spare parts and repairability | Blades, batteries, chargers, motor brushes available |
| Warranty | 5 years (battery 2 years) |
| Package contents | Saw, battery, charger, parallel guide, hex key, manual |
Frequently Asked Questions - PS1000E EGO
How to change the blade of the PS1000E saw?
Use the provided hex key to loosen the central bolt. Remove the flange, replace the blade, then tighten. Make sure the blade is properly seated before use.
What type of battery does the PS1000E saw use?
It uses a 56V lithium-ion battery from the EGO range, interchangeable with other tools of the same brand.
How to adjust the cutting depth?
Unlock the depth adjustment lever on the side of the saw. Adjust the base plate to the desired depth, then lock.
Can I use the saw without a battery?
No, the PS1000E saw is exclusively battery-powered. It does not work on mains power.
How to clean the saw after use?
Disconnect the battery. Use a dry cloth to remove dust. Clean the blade with a mild solvent if necessary. Do not immerse in water.
What to do if the saw does not start?
Check that the battery is charged and properly inserted. Make sure the safety switch is off. If the problem persists, contact customer service.
What is the compatible blade diameter?
The saw accepts blades of 190 mm diameter with a 20 mm arbor. Use only blades designed for circular saws.
How to use the laser guide?
The laser guide activates automatically when the trigger is pressed. It projects a red line to indicate the cutting path.
What is the battery runtime?
The runtime depends on use, but it is approximately 30 minutes with a standard 56V 2.5Ah battery.
Where can I buy spare parts?
Spare parts (blades, batteries, chargers) are available at authorized EGO dealers and on the official website.
User questions about PS1000E EGO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual PS1000E - EGO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PS1000E by EGO.
USER MANUAL PS1000E EGO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EGO
Model : PS1000E
Category : Saw