Delux HA7910 - Kettle UFESA - Free user manual and instructions
Find the device manual for free Delux HA7910 UFESA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | UFESA |
| Model | Delux HA7910 |
| Product type | Cordless electric kettle |
| Capacity | 1,7 L |
| Power | 2200 W |
| Body material | Stainless steel |
| 360° swivel base | Yes |
| Removable anti-scale filter | Yes |
| Automatic shut-off | Yes |
| Overheating protection | Yes |
| Power indicator light | Yes |
| Lid opening | By push button |
| Visible water level | With markings |
| Dimensions (L x W x H) | 22,0 x 18,0 x 24,0 cm |
| Weight | 1,1 kg |
| Power supply voltage | 220-240 V ~ 50/60 Hz |
| Power cord length | 70 cm |
| Care and cleaning | Descale regularly with white vinegar or citric acid |
| Spare parts available | Filter, lid, base |
| Warranty | 2 years |
Frequently Asked Questions - Delux HA7910 UFESA
How to descale my kettle?
Fill the kettle with a mixture of white vinegar and water (1:2) or citric acid (1 spoon per 1 L of water). Bring to a boil, let it sit for 15 minutes, then rinse thoroughly with clean water. Repeat if necessary.
What to do if the kettle does not turn on?
Check that the base is properly plugged in and that the kettle is correctly placed on its base. Make sure the switch is pressed. If the problem persists, the overheating safety device may have been triggered: let it cool down for 10 minutes before trying again.
Can I boil less than 0,5 L?
It is not recommended to boil less than 0,5 L of water to avoid dry operation. The minimum level is usually indicated on the water level window.
How to clean the filter?
The anti-scale filter is removed by pulling it upward. Wash it under running water with a soft brush. You can also soak it in diluted white vinegar to remove stubborn deposits.
The kettle stops before boiling, why?
This may be due to excessive limescale buildup on the heating element. Perform a complete descaling. Also check that the lid is properly closed and that the water level is sufficient.
How long does it take to boil 1 L of water?
With a power of 2200 W, it takes about 3 to 4 minutes to bring 1 L of water to a boil. The time may vary depending on the initial water temperature and the mains voltage.
Can I use the kettle without the lid?
No, you must never operate the kettle without its lid. This exposes you to risk of burns and can damage the appliance. The lid must be properly engaged before turning on.
The indicator light stays on after use, is this normal?
No, the light should turn off automatically when the water boils and the appliance stops. If it stays on continuously, the thermostat may be faulty. Contact customer service.
How to prevent limescale buildup?
Use filtered or demineralized water if your water is very hard. After each use, empty any remaining water and leave the kettle open. Descale regularly every 1 to 2 months depending on water hardness.
Where can I find spare parts for my Ufesa kettle?
You can order spare parts (filter, lid, base) from Ufesa after-sales service or on their website. Keep the exact model reference (Delux HA7910) to facilitate the search.
User questions about Delux HA7910 UFESA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Kettle in PDF format for free! Find your manual Delux HA7910 - UFESA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Delux HA7910 by UFESA.
USER MANUAL Delux HA7910 UFESA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : UFESA
Model : Delux HA7910
Category : Kettle