KD67122A - Fridge Atag - Free user manual and instructions
Find the device manual for free KD67122A Atag in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Refrigerator |
| Brand | Atag |
| Model | KD67122A |
| Energy class | E |
| Total net capacity | 300 L |
| Refrigerator volume | 250 L |
| Freezer volume | 50 L |
| Dimensions (H x W x D) | 177 x 54 x 55 cm |
| Weight | 55 kg |
| Power supply | 220-240 V, 50 Hz |
| Climate class | SN-ST |
| Noise level | 38 dB |
| Main functions | Ventilated cooling, LED lighting, electronic control |
| Defrost | Automatic |
| Refrigerant gas type | R600a |
| Maintenance and cleaning | Clean with a soft cloth and soapy water |
| Safety | Child lock, open door alarm |
| Repairability (index) | 7.5 / 10 |
| Spare parts | Available on request |
| General information | User manual downloadable at notice-facile.com |
Frequently Asked Questions - KD67122A Atag
How to set the temperature of the Atag KD67122A refrigerator?
Use the control panel located inside. Press the Temp button to scroll through settings. The ideal temperature is between 4°C and 5°C for the refrigerator and -18°C for the freezer.
Why is my Atag KD67122A refrigerator making noise?
A slight noise is normal (compressor, fan). If the noise is loud, check that the appliance is level and not in contact with furniture. A clicking noise may indicate a misaligned shelf.
How to defrost the freezer of the KD67122A?
The model is equipped with automatic defrost. However, if a layer of frost forms, remove the food, unplug the appliance, and leave the door open. Never use sharp tools to remove the frost.
What to do if the alarm light turns on on my Atag KD67122A?
The alarm may indicate an open door or too high temperature. Check that the door is properly closed. If the problem persists, contact Atag after-sales service.
How to clean the inside of the refrigerator?
Unplug the appliance. Remove shelves and bins. Wash them with warm soapy water. Wipe the interior with a soft cloth soaked in water and white vinegar. Dry thoroughly before restarting.
What is the climate class of the KD67122A?
The climate class is SN-ST. This means the appliance works correctly in an ambient temperature range of 10°C to 38°C.
How to replace the interior bulb?
Unplug the appliance. Locate the lighting diffuser, usually located at the top. Remove it by unclipping. Replace the bulb with one of the same type (LED or incandescent depending on the model). Put the diffuser back and plug in.
The refrigerator is no longer cooling, what to do?
Check that the appliance is plugged in and the outlet works. Make sure the temperature was not set by mistake. Clean the rear condenser if dusty. If nothing works, contact an Atag technician.
Can I install my Atag KD67122A in an unheated garage?
It depends on the ambient temperature. The climate class SN-ST allows a minimum temperature of 10°C. Below that, the compressor might not start. It is not recommended to place the appliance in a damp or unheated room.
Where to find spare parts for the KD67122A?
Spare parts are available from your Atag dealer or on specialized websites. You can also contact Atag after-sales service to order original parts. Have the serial number of the appliance ready.
User questions about KD67122A Atag
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual KD67122A - Atag and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KD67122A by Atag.
USER MANUAL KD67122A Atag
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atag
Model : KD67122A
Category : Fridge