28354 - Paint gun Draper - Free user manual and instructions
Find the device manual for free 28354 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HVLP Paint Spray Gun |
| Brand | Draper |
| Model | 28354 |
| Weight | 1.2 kg |
| Dimensions (L x W x H) | 25 x 15 x 10 cm |
| Air Inlet | 1/4 inch BSP |
| Operating Pressure | 2.0 - 4.0 bar |
| Paint Cup Capacity | 600 ml |
| Nozzle Size | 1.5 mm |
| Air Consumption | 200 - 300 l/min |
| Spray Pattern | Adjustable round or fan |
| Material | Aluminum body, brass nozzle |
| Viscosity Range | 20 - 30 seconds (DIN 4 cup) |
| Fluid Control | Adjustable knob |
| Fan Control | Adjustable knob |
| Cleaning Method | Disassemble and clean with solvent |
| Safety Features | Trigger lock, air regulator compatible |
| Spare Parts Available | Needle, nozzle, air cap, seals |
| Warranty | 1 year |
Frequently Asked Questions - 28354 Draper
What type of paint can I use with the Draper 28354?
The Draper 28354 is suitable for most common paints such as acrylics, enamels, primers, and varnishes. Ensure the paint is thinned to the correct viscosity (20-30 seconds on a DIN 4 cup) for optimal performance.
How do I clean the spray gun after use?
Disassemble the paint cup and nozzle. Rinse all parts with a suitable solvent like mineral spirits or water-based cleaner, depending on the paint used. Use a brush to clean the nozzle and air cap. Reassemble after drying.
What air pressure is recommended?
The recommended operating pressure is between 2.0 and 4.0 bar (29-58 psi). Adjust the pressure based on paint viscosity and desired spray pattern. Too high pressure may cause overspray.
Can I use the spray gun with a small air compressor?
Yes, but the compressor must supply at least 200-300 l/min of air flow and have a tank of sufficient capacity (at least 25 liters) to avoid pressure drops during continuous use.
How do I adjust the spray pattern?
Turn the fan control knob on the back to adjust from a round pattern to a wide fan. The fluid control knob adjusts paint flow. Test on a scrap piece to achieve the desired coverage.
What is the capacity of the paint cup?
The paint cup has a capacity of 600 ml (20 oz), which is sufficient for small to medium projects without frequent refills.
Is the spray gun suitable for beginners?
Yes, the Draper 28354 is designed with simple controls and is easy to operate. However, practice on scrap material is recommended to master the technique.
What safety precautions should I take?
Always wear a respirator mask, safety goggles, and work in a well-ventilated area. Keep away from open flames as paint solvents are flammable. Use the trigger lock to prevent accidental spraying.
Where can I find spare parts?
Spare parts such as needles, nozzles, air caps, and seal kits are available from Draper authorized dealers or online retailers. Use only genuine parts to maintain performance.
How do I troubleshoot clogging?
Clogging usually occurs if paint is too thick or not properly filtered. Thin the paint to recommended viscosity, strain it, and clean the nozzle immediately after use. If clogged, disassemble and soak the nozzle in solvent.
User questions about 28354 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Paint gun in PDF format for free! Find your manual 28354 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 28354 by Draper.