09707 - Paint gun Draper - Free user manual and instructions
Find the device manual for free 09707 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HVLP Gravity Feed Paint Gun |
| Model | 09707 |
| Brand | Draper |
| Nozzle Size | 1.3 mm |
| Paint Cup Capacity | 600 ml |
| Operating Air Pressure | 2.0 - 4.0 bar (29 - 58 psi) |
| Air Consumption | 4 - 6 cfm at 3 bar |
| Fluid Output | Adjustable |
| Spray Pattern | Round, Vertical, Horizontal |
| Dimensions (LxWxH) | 20 x 15 x 15 cm |
| Weight | 1.2 kg |
| Material | Aluminum body, Chrome-plated |
| Recommended Paint Viscosity | 15 - 25 seconds (DIN 4 cup) |
| Air Inlet Thread | 1/4" BSP |
| Maintenance | Clean after each use, lubricate moving parts |
| Safety Features | Trigger lock, wear protective gear |
| Spare Parts Available | Nozzle set, needle, air valve, seals |
| Warranty | 2 years |
Frequently Asked Questions - 09707 Draper
What is the recommended air pressure for the Draper 09707 paint gun?
The recommended operating air pressure is between 2.0 and 4.0 bar (29-58 psi). Ensure your compressor can deliver sufficient flow (4-6 cfm).
How do I clean the paint gun after use?
Disconnect from air, remove cup, and empty remaining paint. Flush with suitable solvent (water for latex, thinner for oil-based). Use a brush to clean nozzle and air cap. Allow to dry before storage.
Can I spray latex paint with this gun?
Yes, but it must be thinned to a viscosity of 15-25 seconds (DIN 4 cup). Use a strainer to avoid clogs. Start at low pressure and adjust pattern.
What nozzle size does the 09707 have?
The standard nozzle size is 1.3 mm, suitable for medium viscosity materials. For thicker paints, consider a larger nozzle (sold separately).
How to adjust the spray pattern?
Turn the pattern adjustment knob (rear of gun) for round or fan shape. The fluid control knob adjusts paint flow. Fine-tune with air pressure.
Why is the spray spattering?
Common causes: paint too thick, air pressure too low, dirty nozzle, or loose fluid tip. Thin paint, increase pressure, clean gun, and tighten tip.
What safety precautions should I take?
Always wear a respirator mask and goggles. Work in a well-ventilated area. Never point gun at body. Engage trigger lock when not spraying.
How to store the paint gun?
Thoroughly clean and dry the gun. Apply a few drops of light machine oil to moving parts. Store in a dry place, preferably in the original case.
What spare parts are available?
Common spares include nozzle sets, needles, air valve assemblies, and seal kits. Check the manual or Draper official website for part numbers.
Can I use the gun with a small compressor?
The gun requires a compressor with at least 4 cfm at 3 bar. A small hobby compressor may not provide continuous flow; a 24-liter tank is recommended.
User questions about 09707 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Paint gun in PDF format for free! Find your manual 09707 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 09707 by Draper.
USER MANUAL 09707 Draper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draper
Model : 09707
Category : Paint gun