HC65 - Compressor SCHEPPACH - Free user manual and instructions
Find the device manual for free HC65 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Piston air compressor, oil-free |
| Brand | Scheppach |
| Model | HC65 |
| Category | Compressor |
| Power Supply | 230 V ~ 50 Hz |
| Nominal Power | 1.1 kW |
| Max Service Pressure | 8 bar |
| Tank Capacity | 24 L |
| Air Flow (at 6.3 bar) | 170 L/min |
| Dimensions (L x W x H) | 45 x 30 x 35 cm |
| Weight | 12 kg |
| Noise Level | 85 dB(A) |
| Motor Protection | Thermal protection |
| Connection | 1/4" quick coupling |
| Main Functions | Inflation, pneumatic tool supply, painting |
| Maintenance and Cleaning | Daily condensate drainage, clean air filter every 50 h |
| Safety | Safety valve, protective switch, automatic stop at max pressure |
| Spare Parts and Repairability | Filters, fittings, drains available; repair by approved service |
| General Information | Domestic use, portable, stable, 2-year warranty |
Frequently Asked Questions - HC65 SCHEPPACH
Does the Scheppach HC65 compressor require oil?
No, the HC65 model is an oil-free compressor. It therefore does not require oil changes or oil level checks.
How to drain water from the tank?
Use the drain valve located under the tank. Open it regularly after each use to remove condensation. Keep the pressure at about 1 bar when draining.
What maximum pressure can I use?
The maximum service pressure is 8 bar. Never exceed this value to avoid the risk of bursting.
How to adjust the outlet pressure?
Use the pressure regulator (secondary pressure gauge) by turning the knob. The pressure is displayed on the gauge. Then connect your tool.
The compressor stops by itself, is this normal?
Yes, the compressor is equipped with a pressure switch that stops the motor when the maximum pressure is reached. It restarts automatically when the pressure drops below the reset threshold.
What tools can I power with the HC65?
You can use light pneumatic tools such as a stapler, inflation gun, paint spray gun, or low-flow pressure washer. Check the required air flow of your tool.
How to maintain the air filter?
The air filter is located on the side of the compressor. Clean it every 50 hours of use with soapy water and let it dry completely before reinstalling.
What to do if the compressor does not start?
Check the power supply, the condition of the cable, and the pressure switch. If the tank is full, the compressor will not start. Press the discharge button if present. If the problem persists, contact customer service.
Can I use an extension cord?
Yes, but use an extension cord with sufficient cross-section (min. 1.5 mm²) and fully unrolled. An insufficient cross-section may cause a voltage drop and damage the motor.
How to store the compressor after use?
Always drain the condensate, unplug the device, coil the cable, and store it in a dry, frost-free place. Protect it from dust.
User questions about HC65 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual HC65 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HC65 by SCHEPPACH.
USER MANUAL HC65 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : HC65
Category : Compressor