HMK 90A3 MS-BS SP BK - Basket Master Kitchen - Free user manual and instructions
Find the device manual for free HMK 90A3 MS-BS SP BK Master Kitchen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Kitchen hood |
| Brand | Master Kitchen |
| Model | HMK 90A3 MS-BS SP BK |
| Width | 90 cm |
| Depth | 50 cm |
| Height | 60 cm (variable depending on installation) |
| Net weight | 12 kg |
| Power supply | 230 V ~ 50 Hz |
| Maximum power | 200 W |
| Motor type | Silent induction motor |
| Number of speeds | 3 speeds + boost mode |
| Lighting | LED, 2 × 1.5 W |
| Control type | Touch electronic |
| Grease filter | Dishwasher-safe metal filter |
| Charcoal filter | Optional, recommended replacement every 6 months |
| Maximum airflow | 650 m³/h |
| Noise level | 55 dB (A) at normal speed |
| Safety functions | Automatic shutdown after 24 h, overheating detection |
| Recommended maintenance | Clean grease filters every month |
| Spare parts available | Filters, LED bulbs, remote control |
Frequently Asked Questions - HMK 90A3 MS-BS SP BK Master Kitchen
How to install the hood HMK 90A3 MS-BS SP BK?
Installation must be done by a professional. The hood must be firmly fixed to the wall at a height of 65-75 cm above the cooking surface. Make sure the exhaust duct is properly connected or use recirculation mode with a charcoal filter.
How to clean the grease filters?
The metal grease filters can be washed in the dishwasher at 65°C or by hand with hot water and detergent. Let them dry completely before putting them back. Monthly cleaning is recommended.
When should the charcoal filter be replaced?
The charcoal filter should be replaced every 6 months, or more often if the hood is used heavily. It is not washable and is located behind the grease filters.
Why is the hood noisy?
Excessive noise may come from a dirty grease filter, a blocked exhaust duct, or poor installation. Check these items and clean the filters. If the noise persists, contact after-sales service.
How to change the LED bulb?
The LED bulbs are integrated. To replace them, unclip the light panel by pressing the side clips. Replace the defective bulb with an LED bulb of the same type (G4, 1.5 W). Reassemble the panel.
The hood does not turn on, what to do?
Check that the hood is properly plugged in and that the circuit breaker has not tripped. Try turning it on again after a few minutes. If the problem persists, the motor or electronic board may be faulty. Contact an authorized repairer.
Can I use the hood in recirculation mode?
Yes, the hood can operate in recirculation mode if you install a charcoal filter (optional). In this case, the air is filtered and returned to the kitchen. The recirculation kit can be purchased separately.
What is the minimum height between the hood and the hob?
The minimum height is 65 cm for an electric hob and 75 cm for a gas hob. Respect these distances to ensure good extraction and avoid fire risks.
How to adjust the speeds?
Use the touch keys on the control panel: press the speed key to switch from speed 1 to 3. Hold the key to activate boost mode (temporary maximum speed). The indicators show the selected speed.
Where to find spare parts?
Spare parts (filters, bulbs, remote control) are available on the manufacturer's website or from authorized dealers. Use the model reference HMK 90A3 MS-BS SP BK to identify compatible parts.
User questions about HMK 90A3 MS-BS SP BK Master Kitchen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual HMK 90A3 MS-BS SP BK - Master Kitchen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HMK 90A3 MS-BS SP BK by Master Kitchen.