PV-125X - Ventilation Soler & Palau - Free user manual and instructions
Find the device manual for free PV-125X Soler & Palau in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wall-mounted air extractor |
| Brand | Soler & Palau |
| Model | PV-125X |
| Connection diameter | 125 mm |
| Power supply | 220-240 V ~ 50 Hz |
| Power consumption | 25 W |
| Max air flow | 180 m³/h |
| Max noise level | 35 dB(A) |
| Insulation class | Class II |
| IP protection rating | IPX4 |
| Housing material | ABS plastic |
| Color | White |
| Dimensions (W x H x D) | 150 x 150 x 120 mm |
| Net weight | 0.8 kg |
| Protection type | Auto-reset thermal protection |
| Main functions | Air extraction, integrated timer (optional), backdraft damper |
| Maintenance and cleaning | Disconnect before cleaning; clean blades and grille with a damp cloth |
| Spare parts and repairability | Grille, damper, motor bearing available; repairability index: 7.5/10 |
Frequently Asked Questions - PV-125X Soler & Palau
How to install the PV-125X in a wall?
Drill a 125 mm diameter hole, insert the sleeve, fix the wall box and connect the power cable. Respect the safety distances indicated in the manual.
Can this extractor be used in a bathroom?
Yes, the IPX4 protection rating makes it suitable for wet rooms. Ensure the electrical installation is compliant (30 mA differential circuit breaker).
How to adjust the timer on the PV-125X?
The timer is adjusted via a potentiometer accessible after opening the cover. Turn clockwise to increase the delay (max 15 minutes).
What to do if the extractor does not start?
Check the power supply, the circuit breaker, and that the backdraft damper is not blocked. If the motor is hot, the thermal protection may have tripped; wait for it to cool down.
How to clean the extractor blades?
Disconnect the unit. Remove the front grille by unclipping it. Clean the blades and grille with a soft, slightly damp cloth. Do not use abrasive products.
Is the backdraft damper reversible?
The backdraft damper is designed to open during extraction and close when the unit is off. It is not reversible; its mounting direction is indicated on the housing.
What is the recommended mounting height?
For effective extraction, mount the unit at least 2.2 m above the floor, in the upper part of the wall, near the source of steam or humidity.
Can I connect multiple extractors to the same switch?
Yes, provided the total power does not exceed the maximum load of the switch and wiring. Consult an electrician if necessary.
How to know if the extractor is working properly?
Place a sheet of paper in front of the grille; if it is sucked in, extraction is good. Also check that the operating noise is regular without abnormal vibration.
Where to find spare parts for the PV-125X?
Spare parts (grille, damper, motor) are available from authorized Soler & Palau dealers or on their website. Use the model number to order.
User questions about PV-125X Soler & Palau
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ventilation in PDF format for free! Find your manual PV-125X - Soler & Palau and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PV-125X by Soler & Palau.
USER MANUAL PV-125X Soler & Palau
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Soler & Palau
Model : PV-125X
Category : Ventilation