VICTRON ENERGY

BlueSolar MPPT 100/30 - Battery charger VICTRON ENERGY - Free user manual and instructions

Find the device manual for free BlueSolar MPPT 100/30 VICTRON ENERGY in PDF.

📄 32 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice VICTRON ENERGY BlueSolar MPPT 100/30 - page 10
10 / 32
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Solar Charge Controller (MPPT)
Model BlueSolar MPPT 100/30
Brand Victron Energy
Maximum PV Input Voltage 100 V
Maximum Charge Current 30 A
Battery Voltage (Automatic Recognition) 12 V / 24 V
Dimensions (H x W x D) 186 x 214 x 78 mm
Weight 1.5 kg
MPPT Efficiency Up to 99%
Temperature Compensation Built-in, automatic
Bluetooth Connectivity Optional (via dongle)
Protection Features Reverse polarity, over temperature, over voltage, short circuit
Battery Types Supported Flooded, Gel, AGM, Lithium (LiFePO4), etc.
Operating Temperature Range -30°C to +60°C
Maintenance Keep clean and dry; check terminals periodically
Spare Parts & Repairability No user-serviceable parts; contact Victron for repairs
Warranty 5 years (standard)

Frequently Asked Questions - BlueSolar MPPT 100/30 VICTRON ENERGY

What is the maximum solar panel wattage for the BlueSolar MPPT 100/30?
For a 12V system, maximum is 440W; for 24V, maximum is 880W (assuming standard panel voltages). Always check the Voc limit.
Can the controller charge lithium batteries?
Yes, it supports lithium (LiFePO4) batteries with customizable absorption and float voltages via the VictronConnect app.
How do I connect the charge controller to my battery and solar panels?
Connect the battery first, then the solar panels. Use proper fuses and cable gauges. Follow the manual for correct sequence.
What do the LED indicators mean?
Green LED: charging, blinking=bulk, solid=absorption/float. Orange LED: fault. Red LED: over temperature or other error. Consult manual for details.
Does the unit have Bluetooth built-in?
No, but it has a port for the Victron VE.Direct Bluetooth Smart Dongle (sold separately) for wireless monitoring.
Can I use this controller with a 48V battery bank?
No, it is designed for 12V or 24V systems only. For 48V, consider the BlueSolar MPPT 150/35 or similar.
What is the maximum input voltage from solar panels?
The maximum PV open-circuit voltage is 100V. Exceeding this can damage the controller.
How do I reset the controller?
Disconnect all power (battery and solar), wait 1 minute, then reconnect the battery first.
Is the controller waterproof?
No, it is not waterproof. It should be installed in a dry, ventilated area protected from moisture.
Can I parallel multiple controllers on the same battery bank?
Yes, you can parallel multiple BlueSolar controllers. Each must have its own solar array and settings configured for the same battery type.

User questions about BlueSolar MPPT 100/30 VICTRON ENERGY

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Battery charger in PDF format for free! Find your manual BlueSolar MPPT 100/30 - VICTRON ENERGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BlueSolar MPPT 100/30 by VICTRON ENERGY.

USER MANUAL BlueSolar MPPT 100/30 VICTRON ENERGY

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : VICTRON ENERGY

Model : BlueSolar MPPT 100/30

Category : Battery charger