DTL062 - Screwdriver MAKITA - Free user manual and instructions
Find the device manual for free DTL062 MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Impact Driver |
| Brand | Makita |
| Model | DTL062 |
| Power Supply | Li-ion 18V battery (sold separately) |
| No Load Speed | 0 - 2,500 rpm |
| Impact Rate | 0 - 3,200 ipm |
| Max Torque | 150 Nm |
| Screwing Capacity | M4 to M10 |
| Chuck | 1/4" hex |
| Dimensions (L x W x H) | 165 x 81 x 252 mm |
| Weight (with battery) | 1.6 kg |
| Main Functions | On/off, reversible rotation direction, electronic speed control, LED light, spindle lock |
| Maintenance and Cleaning | Wipe with a dry soft cloth. Do not use solvents or harsh detergents. |
| Safety | Wear safety glasses and gloves. Do not expose to moisture. Disconnect battery before any adjustment. |
| Spare Parts and Repairability | Battery, charger, bits, carbon brushes (if applicable). Consult a Makita authorized service center. |
| Warranty | 3 years (depending on country and conditions of use) |
Frequently Asked Questions - DTL062 MAKITA
Which battery is compatible with the Makita DTL062?
The impact driver uses a Li-ion 18V battery from the Makita series (e.g., BL1815, BL1820). The battery and charger are sold separately.
How to reverse the rotation direction?
Use the rotation direction switch located above the trigger. Push it to the left for tightening, to the right for loosening.
Why is the LED flashing?
Flashing may indicate a low battery or motor stall. Recharge the battery or remove the obstacle. Consult the manual if the problem persists.
Can this tool be used for drilling?
No, it is an impact driver. Designed for driving screws, not drilling. Use a drill-driver for drilling holes.
How to adjust the speed?
Speed is proportional to trigger pressure. Press lightly for slow speed, harder for fast speed.
What is the maximum screw capacity?
It can drive screws up to M10 in metal and similarly sized wood screws. For heavier tasks, use a more powerful tool.
Is the LED light adjustable?
No, the light automatically turns on when the trigger is pressed and turns off a few seconds after release.
How to clean the impact driver?
Clean the exterior with a dry soft cloth. Do not use water, solvents, or abrasive products. Clean ventilation slots with a soft brush.
Where to find spare parts?
Contact a Makita authorized service center or visit the official Makita website. Common parts like bits, batteries, and chargers are available from retailers.
What to do in case of overheating?
Stop the tool and remove the battery. Allow to cool in open air. Check that the ventilation slots are not blocked. If the problem persists, have the tool checked.
User questions about DTL062 MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual DTL062 - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DTL062 by MAKITA.
USER MANUAL DTL062 MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : DTL062
Category : Screwdriver