BIM125 - Ice Maker Summit - Free user manual and instructions
Find the device manual for free BIM125 Summit in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Ice machine |
| Brand | Summit |
| Model | BIM125 |
| Ice production | 12 kg per 24 hours |
| Water tank capacity | 1 L |
| Storage bin capacity | 500 g |
| Dimensions (W x D x H) | 30 x 25 x 32 cm |
| Net weight | 10 kg |
| Power supply | 220-240 V, 50 Hz, 150 W |
| Refrigerant | R600a |
| Production cycle | 7 to 15 minutes |
| Functions | Self-cleaning, water level indicator, automatic shut-off when bin full |
| Material | Stainless steel and ABS plastic |
| Maintenance | Regular cleaning with white vinegar, descaling every 3 months |
| Safety | Overheating protection, safety switch |
| Included accessories | Ice bucket, ice scoop |
| Warranty | 2 years |
Frequently Asked Questions - BIM125 Summit
How to install the ice machine?
Let the machine stand upright for 2 hours before first use. Plug it in, fill the water tank with drinking water, and turn it on. Production starts automatically.
How long does it take to get the first ice cubes?
The first cycle takes about 10 to 15 minutes. Subsequent ice cubes are produced faster.
Why are the ice cubes very small?
This may be due to high ambient temperature or water that is too cold. Make sure the appliance is out of direct sunlight and the water is at room temperature.
How to clean the ice machine?
Use the self-cleaning cycle with a mixture of white vinegar and water (1:1). Then rinse with clean water. Perform this every 2 weeks.
Can I use tap water?
Yes, but it is recommended to use filtered water to avoid limescale and improve the taste of ice cubes.
What to do if the machine does not turn on?
Check that the plug is connected and the water tank is filled. If the red light flashes, wait a few minutes for the compressor to cool down.
What is the maximum ice storage capacity?
The storage bin can hold up to 500 g of ice cubes. Once full, the appliance stops automatically.
Should I turn off the machine at night?
No, you can leave it on continuously. It stops automatically when the bin is full and restarts when ice cubes are removed.
How to descale the appliance?
Use a special descaler for ice machines or a white vinegar solution. Run a cleaning cycle, then rinse thoroughly.
Where can I find spare parts?
Contact Summit after-sales service or check the list of authorized dealers on the official website. Common parts like the ice bucket are available.
User questions about BIM125 Summit
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ice Maker in PDF format for free! Find your manual BIM125 - Summit and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BIM125 by Summit.
USER MANUAL BIM125 Summit
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Summit
Model : BIM125
Category : Ice Maker